Issue 6, 2018

Improvements to the analytical performance of inductively coupled plasma optical emission spectrometry by coupling a multi-mode sample introduction system to an infrared heated pre-evaporation tube

Abstract

A multimode sample introduction system (MSIS) was coupled to a pre-evaporation tube, which was connected to the base of the torch in inductively coupled plasma optical emission spectrometry (ICPOES). The pre-evaporation tube and bottom 7 cm (for ARCOS instrument) or 3 cm (for Agilent instrument) of the torch were surrounded by an infrared-heated ceramic rope, which was heated to 80 °C in nebulisation mode and to 100 °C or 175 °C in hydride generation and dual modes. This resulted in improved sensitivity and detection limit for many elements, especially hydride-forming ones, compared to what is achieved with pneumatic nebulisation, but in some degradation of precision. The applicability of the approach was demonstrated through the accurate determination of several elements in two standard reference materials (waste water and corn bran) with matrix matching but without internal standardization. With infrared heating and operating MSIS in hydride generation (HG) mode, more elements than expected could be accurately determined, including Be, Co, Cr, Mg, Mn, etc., whose determination had not been reported in this mode before.

Graphical abstract: Improvements to the analytical performance of inductively coupled plasma optical emission spectrometry by coupling a multi-mode sample introduction system to an infrared heated pre-evaporation tube

Supplementary files

Article information

Article type
Technical Note
Submitted
16 2月 2018
Accepted
26 4月 2018
First published
26 4月 2018

J. Anal. At. Spectrom., 2018,33, 1068-1075

Improvements to the analytical performance of inductively coupled plasma optical emission spectrometry by coupling a multi-mode sample introduction system to an infrared heated pre-evaporation tube

T. K. Anderlini and D. Beauchemin, J. Anal. At. Spectrom., 2018, 33, 1068 DOI: 10.1039/C8JA00051D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements