Issue 8, 2017

C–N–S tridoping into TiO2 matrix for photocatalytic applications: observations, speculations and contradictions in the codoping process

Abstract

The bulk heterostructuring of TiO2via codoping with nonmetals still holds possibilities for the potential development of a visible light photocatalyst and for overcoming the obstacles bracketed with metal ion substitution. In particular, tridoping of C–N–S into TiO2 was spotlighted with due consideration of its mesmerizing features like simultaneous and relatively low energy substitution of carbon, nitrogen and sulfur from the available precursors (thiourea, L-cystine and L-cysteine), stabilization of the anatase crystal structure, red shift in the band gap response towards the solar spectrum, cooperative interactions with these codopants, and the absence of any impure phase formation even at elevated temperature and with high doping density during the substitution process. Despite these flexibilities, accessible reports on C–N–S-TiO2 are not extensive and the discussions presented are far from the relevant aspects of the doping mechanism. With the intention of shedding light on the pros and cons of C–N–S-TiO2, this review is framed with the following viewpoints: (i) underscoring their beneficial effects in photocatalysis; (ii) underlining the doping mode of each dopant in the codoped system with respect to the reaction conditions; (iii) contradictions about the doping states of each dopant in the codoped system with reference to the previous literature; (iv) tentative discussion concepts like modifications of defect structures, dopant distribution, doping mode, mutual interferences among the dopants and crystallization kinetics in the course of codoping. The results emphasize that the codoping process involving carbon, nitrogen and sulfur is quite obfuscated as several doping modes are witnessed for each dopant, which are coupled to other factors like dopant diffusivity and solubility, extent of doping, dopant segregation at the surface, nature of the dopant precursor, unpredictable interactions of the dopant states, and interactive reactions between the dopant and titania precursor together with the annealing conditions. With critical analysis with reference to TiO2, it is envisaged that thiourea is the best functional precursor to attain diverse doping states for nitrogen, and cationic and anionic doping states for carbon and sulfur, together with the formation of adsorbed sulfate anions. Future research must shed light on the dopant–dopant and dopant–lattice interactions followed by their synergism at the structure-electronic level to uncover the doping mechanism in the codoped systems.

Graphical abstract: C–N–S tridoping into TiO2 matrix for photocatalytic applications: observations, speculations and contradictions in the codoping process

Supplementary files

Article information

Article type
Review Article
Submitted
10 4月 2017
Accepted
16 6月 2017
First published
22 6月 2017

Inorg. Chem. Front., 2017,4, 1250-1267

C–N–S tridoping into TiO2 matrix for photocatalytic applications: observations, speculations and contradictions in the codoping process

C. Sushma and S. G. Kumar, Inorg. Chem. Front., 2017, 4, 1250 DOI: 10.1039/C7QI00189D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements