Issue 35, 2017

Formation of titanium dioxide core–shell microcapsules through a binary-phase spray technique

Abstract

Core–shell microcapsules consisting of a titanium dioxide shell and a hydrophobic solvent core have been prepared with diameters of a few micrometers and a narrow size distribution using a simple and fast airbrush technique. These microcapsules were prepared at room temperature in a single-step process in which an oil with a dissolved titanium alkoxide precursor was forced together with an aqueous solution, containing a surface-active polymer, through a narrow spray nozzle using a nitrogen gas propellant. Several different parameters of chemical, physical, and processing origin were investigated to find an optimal recipe. Two different alkanes, one ketone, and four alcohols were tested and evaluated as core materials, alone or together with the antifungal biocide 2-n-octyl-4-isothiazolin-3-one (OIT). Long-chain alcohols were found suitable as core oil due to their low solubility in water and surface activity. The addition of the surface-active polymers in the water phase was important in aiding the formation and stabilization of the titanium dioxide shell. An impressive loading of 50 wt% of the semi-hydrophobic OIT was possible to encapsulate using this simple and applicable procedure.

Graphical abstract: Formation of titanium dioxide core–shell microcapsules through a binary-phase spray technique

Article information

Article type
Paper
Submitted
19 4月 2017
Accepted
31 7月 2017
First published
31 7月 2017
This article is Open Access
Creative Commons BY-NC license

Phys. Chem. Chem. Phys., 2017,19, 23878-23886

Formation of titanium dioxide core–shell microcapsules through a binary-phase spray technique

J. Bergek, B. Elgh, A. E. C. Palmqvist and L. Nordstierna, Phys. Chem. Chem. Phys., 2017, 19, 23878 DOI: 10.1039/C7CP02571H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements