Issue 44, 2016

Determination of l-DOPA at an optimized poly(caffeic acid) modified glassy carbon electrode

Abstract

A thin layer of poly(caffeic acid) was electrodeposited onto the surface of a glassy carbon (GC) electrode under potentiostatic conditions in aqueous solution. This system was utilized for the detection of 3,4-dihydroxy-L-phenylalanine (L-DOPA) by square wave voltammetry (SWV) after the experimental parameters of pH, step, amplitude, and frequency were studied by a full factorial design (FFD) to identify the significant parameters and their interactions. The results showed that pH, step, and amplitude were significant, whereas frequency did not significantly impact response. Subsequently, a central composite design (CCD) was performed for the three significant factors in order to further optimize the method. The optimum conditions were pH: 4.8; step potential: 5 mV; amplitude: 88 mV. Under these optimized conditions, the modified electrode demonstrated high selectivity for L-DOPA in the presence of common biological interferences such as ascorbic acid and uric acid by the observation of three distinctive and well resolved oxidation peaks. The sensor was simple to prepare, provided short analysis times, and exhibited a linear range from 1.0–50.0 μM with a detection limit of 0.14 μM for analysis of L-DOPA.

Graphical abstract: Determination of l-DOPA at an optimized poly(caffeic acid) modified glassy carbon electrode

Supplementary files

Article information

Article type
Paper
Submitted
01 7月 2016
Accepted
24 9月 2016
First published
07 10月 2016

Anal. Methods, 2016,8, 7891-7897

Determination of L-DOPA at an optimized poly(caffeic acid) modified glassy carbon electrode

A. Rohanifar, A. M. Devasurendra, J. A. Young and J. R. Kirchhoff, Anal. Methods, 2016, 8, 7891 DOI: 10.1039/C6AY01873D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements