Issue 38, 2014

Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process

Abstract

A two-step, spin-coating process to synthesize a high quality perovskite film at room temperature at ambient atmosphere is reported. Combining an optimized PEDOT:PSS hole-transport layer and a PC71BM acceptor, the device achieved a power conversion efficiency of 16.31% with a remarkably high Voc of 1.05 V and FF of 0.78. The efficiency reproducibility of the devices is also high: 80% of devices achieve efficiency higher than 15%.

Graphical abstract: Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process

Supplementary files

Article information

Article type
Paper
Submitted
17 7月 2014
Accepted
23 7月 2014
First published
25 7月 2014

J. Mater. Chem. A, 2014,2, 15897-15903

Author version available

Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process

C. Chiang, Z. Tseng and C. Wu, J. Mater. Chem. A, 2014, 2, 15897 DOI: 10.1039/C4TA03674C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements