Issue 30, 2017

A fiber asymmetric supercapacitor based on FeOOH/PPy on carbon fibers as an anode electrode with high volumetric energy density for wearable applications

Abstract

Fiber supercapacitors are promising energy storage devices for wearable applications. However, the fiber supercapacitors are currently limited by the mediocre capacitance performances due to the use of typical carbon materials as the anode, sacrificing the volumetric energy density of the whole device. In addition, the inability to undergo washable cycles and poor self-discharge rate prevents the fiber-shaped supercapacitors from being a true energy textile and affects their practicability. Hence, the porous anode electrode FeOOH/PPy@CF has been firstly prepared with a high volumetric capacitance of 30.17 F cm−3, contributing to a high volumetric energy density of 2 mWh cm−3 (based on the whole encapsulated device) for a fiber asymmetric supercapacitor MnO2@CF//FeOOH/PPy@CF in PVA/LiCl. Good flexibility could be exhibited when it was woven into a glove. Desired working voltage and capacity output could be easily obtained when connecting devices in series and parallel. The encapsulated device could work stably even after it was dipped for multiple cycles in different solutions and with intensive stirring in water that simulates washing cycles. The self-discharge rate could be mitigated when an ionogel electrolyte ([EMIM][TFSI]/FS) was incorporated and this further enhanced the energy density to 3.7 mWh cm−3. The outstanding properties of our assembled asymmetric fiber supercapacitor device render it a good candidate for practical wearable energy storage devices.

Graphical abstract: A fiber asymmetric supercapacitor based on FeOOH/PPy on carbon fibers as an anode electrode with high volumetric energy density for wearable applications

Supplementary files

Article information

Article type
Paper
Submitted
24 4月 2017
Accepted
23 6月 2017
First published
23 6月 2017

Nanoscale, 2017,9, 10794-10801

A fiber asymmetric supercapacitor based on FeOOH/PPy on carbon fibers as an anode electrode with high volumetric energy density for wearable applications

X. Gong, S. Li and P. S. Lee, Nanoscale, 2017, 9, 10794 DOI: 10.1039/C7NR02896B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements