Issue 31, 2016

3D-printed microfluidic devices: fabrication, advantages and limitations—a mini review

Abstract

A mini-review with 79 references. In this review, the most recent trends in 3D-printed microfluidic devices are discussed. In addition, a focus is given to the fabrication aspects of these devices, with the ESI containing detailed instructions for designing a variety of structures including: a microfluidic channel, threads to accommodate commercial fluidic fittings, a flow splitter; a well plate, a mold for PDMS channel casting; and how to combine multiple designs into a single device. The advantages and limitations of 3D-printed microfluidic devices are thoroughly discussed, as are some future directions for the field.

Graphical abstract: 3D-printed microfluidic devices: fabrication, advantages and limitations—a mini review

Supplementary files

Article information

Article type
Minireview
Submitted
13 6月 2016
Accepted
14 7月 2016
First published
27 7月 2016

Anal. Methods, 2016,8, 6005-6012

3D-printed microfluidic devices: fabrication, advantages and limitations—a mini review

C. Chen, B. T. Mehl, A. S. Munshi, A. D. Townsend, D. M. Spence and R. S. Martin, Anal. Methods, 2016, 8, 6005 DOI: 10.1039/C6AY01671E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements