Issue 19, 2015

Toward “rocking-chair type” Mg–Li dual-salt batteries

Abstract

High energy-density rechargeable batteries are strongly demanded from the viewpoint of energy and environmental concern. This work is devoted to fundamental electrochemistry on a novel concept of rechargeable batteries, “rocking-chair type” Mg–Li dual-salt batteries (DSBs), where both Mg and Li cations are carrier ions. In this system, dangerous dendritic growth is drastically suppressed by co-electrodeposition of Mg and Li, and Mg–Li alloys can be used as anode materials with high electrical capacities. As a DSB cathode material that can accommodate both Mg and Li cations, we use a spinel oxide MgCo2O4, in which an eccentric insertion mechanism, the “intercalation & push-out” process, occurs. Mg insertion occurs at 2.9 V vs. Mg2+/Mg and Li insertion occurs at 3.1 V vs. Li+/Li, being consistent with ab initio calculations, and its capacity approximately amounts to 150–200 mA h g−1. In the combination of MgCo2O4 and Mg50Li50 alloys, the cell voltage during discharge is as high as about 2–3 V. The concept of rocking-chair type DSB systems provides a new strategy for future safe rechargeable batteries combining high energy/power densities.

Graphical abstract: Toward “rocking-chair type” Mg–Li dual-salt batteries

Supplementary files

Article information

Article type
Communication
Submitted
20 2月 2015
Accepted
07 4月 2015
First published
07 4月 2015

J. Mater. Chem. A, 2015,3, 10188-10194

Author version available

Toward “rocking-chair type” Mg–Li dual-salt batteries

T. Ichitsubo, S. Okamoto, T. Kawaguchi, Y. Kumagai, F. Oba, S. Yagi, N. Goto, T. Doi and E. Matsubara, J. Mater. Chem. A, 2015, 3, 10188 DOI: 10.1039/C5TA01365H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements