Issue 16, 2019

Room temperature production of graphene oxide with thermally labile oxygen functional groups for improved lithium ion battery fabrication and performance

Abstract

Graphene oxide (GO) has drawn intense research interest over the past decade, contributing to remarkable progress in its relevant applications. The chemical production of GO, however, is challenged by destructive and slowly propagating oxidation, especially for large flake graphite. Herein, we report a simple but effective method to produce well-oxidized and less defective GO by chemically oxidizing commercially available expandable graphite at room temperature (25 °C). Compared to natural graphite with similar flake sizes, expandable graphite afforded faster complete oxidation under the same oxidizing conditions. In addition, chemical oxidation at room temperature, relative to that at higher temperatures (35 and 45 °C), resulted in a reduced defect concentration in GO. Furthermore, the GO derived from the oxidation of expandable graphite at room temperature exhibited superior electrical conductivity after mild thermal treatment at 150 °C. Considering the energy-saving in both GO synthesis and reduction, the low temperature GO conversion process can be easily integrated into many other electroconductive applications. As a proof of concept, we achieved a good LiFePO4 (without carbon-coating) cathode formulation with our GO, which contributed as a 2D binder (before annealing), and obtained a conductive cathode with improved capacity and high rate performance after mild thermal annealing at 150 °C.

Graphical abstract: Room temperature production of graphene oxide with thermally labile oxygen functional groups for improved lithium ion battery fabrication and performance

Supplementary files

Article information

Article type
Paper
Submitted
28 二月 2019
Accepted
22 三月 2019
First published
23 三月 2019

J. Mater. Chem. A, 2019,7, 9646-9655

Room temperature production of graphene oxide with thermally labile oxygen functional groups for improved lithium ion battery fabrication and performance

J. Qin, Y. Zhang, S. E. Lowe, L. Jiang, H. Y. Ling, G. Shi, P. Liu, S. Zhang, Y. L. Zhong and H. Zhao, J. Mater. Chem. A, 2019, 7, 9646 DOI: 10.1039/C9TA02244A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements