Issue 6, 2019

Site selective adsorption and relocation of SOx in deactivation of Cu–CHA catalysts for NH3-SCR

Abstract

The presence of SO2 in diesel exhaust gases causes severe deactivation of the Cu–CHA catalysts for the reduction of NOx by selective catalytic reduction with ammonia (NH3-SCR). The deactivation of Cu–CHA catalysts after exposure to SO2 at 550 °C for 0.5, 4, 8, 16 and 32 h, and subsequent regeneration in SO2-free gas at 550 °C was related to the site-dependent interactions of SO2 with Cu ions associated with one or two framework Al centers (Z-CuOH or Z2-Cu), as determined by electron paramagnetic resonance (EPR). SO2 primarily interacts with the EPR-silent Z-CuOH sites, but a new, EPR-active Z2-Cu phase develops with SO2 exposure time as well. A part of the original Z2-Cu species remain unaffected by SO2, which is associated with a maximum deactivation level of about 90%. Regeneration at 550 °C leads to the release of most of the SO2 from the Z-CuOH sites and some relocation of sulfur to Z2-Cu sites occurs. The activation energy for NH3-SCR on the SO2 exposed catalysts decreases with S content from about 65 kJ mol−1 to 30 kJ mol−1. For the regenerated catalysts, the activation energy is restored to about 65 kJ mol−1, showing the importance of the Z-CuOH sites for the NH3-SCR reaction.

Graphical abstract: Site selective adsorption and relocation of SOx in deactivation of Cu–CHA catalysts for NH3-SCR

Article information

Article type
Paper
Submitted
25 十月 2018
Accepted
04 三月 2019
First published
05 三月 2019

React. Chem. Eng., 2019,4, 1081-1089

Site selective adsorption and relocation of SOx in deactivation of Cu–CHA catalysts for NH3-SCR

P. S. Hammershøi, A. L. Godiksen, S. Mossin, P. N. R. Vennestrøm, A. D. Jensen and T. V. W. Janssens, React. Chem. Eng., 2019, 4, 1081 DOI: 10.1039/C8RE00275D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements