Issue 7, 2012

Considerations for measurement of individual nanoparticles or microparticles by ICP-MS: determination of the number of particles and the analyte mass in each particle

Abstract

The unique considerations to determine the number of particles per liter and analyte mass (particle size) distributions from single particle ICP-MS measurements with quadrupole or sequential sector field mass spectrometers are discussed. The short, transient nature of signals from single particles affects the optimum selection of dwell times and pulse counting versus analog detection. The signal peak width due to a cloud of ions produced from a single particle also limits the maximum number of single particles that can be accurately measured in a given total measurement time and the dynamic range of the particle number concentration. The range of analyte mass (particle size) measurements is limited by the rates of vaporization and diffusion. Approaches to calibrate the number of particles detected as a function of the number of particles per mL and to calibrate the signal from a single particle as a function of analyte mass are discussed. Measurement of particle diameter distributions for spherical, solid particles are assessed.

Graphical abstract: Considerations for measurement of individual nanoparticles or microparticles by ICP-MS: determination of the number of particles and the analyte mass in each particle

Article information

Article type
Paper
Submitted
29 二月 2012
Accepted
15 五月 2012
First published
06 六月 2012

J. Anal. At. Spectrom., 2012,27, 1143-1155

Considerations for measurement of individual nanoparticles or microparticles by ICP-MS: determination of the number of particles and the analyte mass in each particle

J. W. Olesik and P. J. Gray, J. Anal. At. Spectrom., 2012, 27, 1143 DOI: 10.1039/C2JA30073G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements