Issue 3, 2017

Oligomeric models for estimation of polydimethylsiloxane–water partition ratios with COSMO-RS theory: impact of the combinatorial term on absolute error

Abstract

A series of 12 oligomeric models for polydimethylsiloxane (PDMS) were evaluated for their effectiveness in estimating the PDMS–water partition ratio, KPDMS–w. Models ranging in size and complexity from the –Si(CH3)2–O– model previously published by Goss in 2011 to octadeca-methyloctasiloxane (CH3–(Si(CH3)2–O–)8CH3) were assessed based on their RMS error with 253 experimental measurements of log KPDMS–w from six published works. The lowest RMS error for log KPDMS–w (0.40 in log K) was obtained with the cyclic oligomer, decamethyl-cyclo-penta-siloxane (D5), (–Si(CH3)2–O–)5, with the mixing-entropy associated combinatorial term included in the chemical potential calculation. The presence or absence of terminal methyl groups on linear oligomer models is shown to have significant impact only for oligomers containing 1 or 2 –Si(CH3)2–O– units. Removal of the combinatorial term resulted in a significant increase in the RMS error for most models, with the smallest increase associated with the largest oligomer studied. The importance of inclusion of the combinatorial term in the chemical potential for liquid oligomer models is discussed.

Graphical abstract: Oligomeric models for estimation of polydimethylsiloxane–water partition ratios with COSMO-RS theory: impact of the combinatorial term on absolute error

Supplementary files

Article information

Article type
Paper
Submitted
14 六月 2016
Accepted
02 九月 2016
First published
05 九月 2016

Environ. Sci.: Processes Impacts, 2017,19, 270-275

Oligomeric models for estimation of polydimethylsiloxane–water partition ratios with COSMO-RS theory: impact of the combinatorial term on absolute error

J. M. Parnis and D. Mackay, Environ. Sci.: Processes Impacts, 2017, 19, 270 DOI: 10.1039/C6EM00355A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements