Issue 9, 2017

A novel, density-independent and FTIR-compatible approach for the rapid extraction of microplastics from aquatic sediments

Abstract

Microplastics have been detected in aquatic sediments around the world, highlighting the propensity of this matrix to serve as a sink for these structural pollutants. More reliable and reproducible extraction protocols for microplastics would facilitate comparisons across studies. A number of different extraction techniques are currently used to separate microplastics from sediment and almost exclusively employ density-based separations, which take advantage of the inherent densities of plastic particles. Some of these techniques are cost-effective but fail to fully recover all plastic types. Other techniques may recover most plastic types, but are more costly and/or hazardous to human or environmental health. We present here a novel, cost-effective oil extraction protocol (OEP) that provides an alternative to density-based approaches by taking advantage of the oleophilic properties of microplastics. Using this technique, we counted microplastic particles in spiked sediment samples using light microscopy and observed 96.1% ± 7.4 recovery for total microplastics, with recovery rates of 92.7% ± 4.3 for fibers and 99% ± 1.4 for particles. Subsequent analysis with Fourier-Transform Infrared Spectrometry (FTIR) revealed that the oil interfered with the FTIR spectrum of microplastics, but that an additional, post-extraction clean-up step using ethyl alcohol (90%) removed residual traces of oil and eliminated the FTIR spectral interference. The application of this new technique to shoreline sediment samples collected from sites in urban Vancouver, British Columbia, Canada, and a remote beach on Vancouver Island, as well as bulk seawater, demonstrated that the oil extraction protocol is effective for environmental samples. This novel OEP represents a cost-effective and reliable alternative to leading density-based techniques.

Graphical abstract: A novel, density-independent and FTIR-compatible approach for the rapid extraction of microplastics from aquatic sediments

Supplementary files

Article information

Article type
Paper
Submitted
02 十月 2016
Accepted
11 一月 2017
First published
12 一月 2017

Anal. Methods, 2017,9, 1419-1428

A novel, density-independent and FTIR-compatible approach for the rapid extraction of microplastics from aquatic sediments

E. M. Crichton, M. Noël, E. A. Gies and P. S. Ross, Anal. Methods, 2017, 9, 1419 DOI: 10.1039/C6AY02733D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements