Issue 2, 2024

Solvent–base mismatch enables the deconstruction of epoxy polymers and bisphenol A recovery

Abstract

Fiber-reinforced epoxy composites are key materials for the construction of wind turbine blades and airplanes due to their remarkable mechanical strength properties. On the flipside, their physical and chemical inertness results in a lack of viable recycling technologies. Recently, tailored resins have been introduced, which allow controlled fragmentation of the polymer matrix and thus the recovery of embedded fibres. However, for the separated thermoset epoxy fragments, there is no recycling solution available, resulting in the loss of complex molecular structures during their disposal. Here, we report a chemical process for recovering bisphenol A (BPA) from epoxy resins using a mismatched base–solvent system at an elevated temperature. We demonstrate a combinatory disassembly process/chemical deconstruction strategy on a commercial tailored composite sample, isolating both fibres and the polymer building block. The recovered BPA could potentially be reused in established polymer production chains, thus closing the recycling loop and reducing the need for virgin resources.

Graphical abstract: Solvent–base mismatch enables the deconstruction of epoxy polymers and bisphenol A recovery

Supplementary files

Article information

Article type
Paper
Submitted
29 9月 2023
Accepted
27 11月 2023
First published
05 12月 2023

Green Chem., 2024,26, 815-824

Solvent–base mismatch enables the deconstruction of epoxy polymers and bisphenol A recovery

H. Sun, A. Ahrens, G. M. F. Batista, B. S. Donslund, A. K. Ravn, E. V. Schwibinger, A. Nova and T. Skrydstrup, Green Chem., 2024, 26, 815 DOI: 10.1039/D3GC03707J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements