Issue 37, 2021

Polymers and interfacial modifiers for durable perovskite solar cells: a review

Abstract

This review focuses on the advancements in stability of perovskite solar cells under stress from ambient moisture, high temperatures, and UV light exposure. Moisture stability has been improved by utilizing several polymeric encapsulation methods, moisture-resistant hole transport layers (HTLs), CF4 plasma treatments, and perovskite grain crosslinking. Fluorinated encapsulation methods have proven especially successful, producing cells that maintained their PCE after 75 days at 50% RH and 5 mW cm−2 of UV radiation. Temperature destabilization has been hypothesized to occur as a result of perovskite phase transitions and the HTL dopant migration to the mesoporous TiO2 surface. Temperature-sensitive perovskites have been stabilized by tuning the Goldschmidt tolerance factor and introducing thermally resistant HTLs embedded in a polymeric matrix with polycarbonate acting as an effective thermal insulating matrix. UV light instabilities have also been shown to occur due to the photocatalysis of TiO2 and the TiO2 perovskite interface. The introduction of a Sb2S3 buffer or CsBr clusters as interface modifiers can stabilize the interface of TiO2 perovskite. Herein, we aim at highlighting the main processes that prevent perovskite degradation using polymers and interfacial modifiers.

Graphical abstract: Polymers and interfacial modifiers for durable perovskite solar cells: a review

Article information

Article type
Review Article
Submitted
17 3月 2021
Accepted
25 8月 2021
First published
26 8月 2021

J. Mater. Chem. C, 2021,9, 12509-12522

Polymers and interfacial modifiers for durable perovskite solar cells: a review

D. (. Jones, Y. An, J. Hidalgo, C. Evans, J. N. Vagott and J. Correa-Baena, J. Mater. Chem. C, 2021, 9, 12509 DOI: 10.1039/D1TC01243F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements