Issue 22, 2020

Probing the limits of linker substitution in aluminum MOFs through water vapor sorption studies: mixed-MOFs instead of mixed-linker CAU-23 and MIL-160 materials

Abstract

We report a systematic study on the possibility of forming mixed-linker metal–organic frameworks (MOFs) spanning between the aluminum MOFs CAU-23 and MIL-160 with their 2,5-thiophenedicarboxylate (TDC) and 2,5-furandicarboxylate (FDC) linkers, respectively. The planned synthesis of a mixed-linker MOF, combining TDC and FDC in the framework turned out to yield a rather largely intricate mixture of CAU-23 and MIL-160. This is due to the different opening angles of 150° for TDC versus 120° for FDC and the concomitant cistrans versus cis-only OH-bridges in the infinite secondary building unit {Al(μ-OH)(O2C–)} chains. At the same time, the CAU-23 phase is accompanied by the polymorphic MIL-53-TDC phase with trans-only OH-bridges. The measurement of water vapor sorption isotherms was the method of choice to confirm the formation of mixed MOFs instead of mixed-linker phases. Thereby, the water sorption isotherms indicate the simultaneous formation of both MOF phases, albeit they do not exclude mixed-linker MOFs which may have formed at low levels of substitution. The differentiation via powder X-ray diffractometry (PXRD), IR-spectroscopy and nitrogen sorption was either not conclusive enough or impossible, due to similarities of the neat MOF phases. The synthesized MOF mixtures within the TDC : FDC ratios of 38 : 62 up to 82 : 18 exhibit two or three uptake steps in the water sorption isotherm, with the first two corresponding to an overlay from the individual water sorption isotherm of CAU-23 and MIL-160 and a third one from the additional MIL-53-TDC.

Graphical abstract: Probing the limits of linker substitution in aluminum MOFs through water vapor sorption studies: mixed-MOFs instead of mixed-linker CAU-23 and MIL-160 materials

Supplementary files

Article information

Article type
Paper
Submitted
19 3月 2020
Accepted
04 5月 2020
First published
05 5月 2020

Dalton Trans., 2020,49, 7373-7383

Probing the limits of linker substitution in aluminum MOFs through water vapor sorption studies: mixed-MOFs instead of mixed-linker CAU-23 and MIL-160 materials

C. Schlüsener, D. N. Jordan, M. Xhinovci, T. J. Matemb Ma Ntep, A. Schmitz, B. Giesen and C. Janiak, Dalton Trans., 2020, 49, 7373 DOI: 10.1039/D0DT01044H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements