Issue 6, 2019

Mechanism-based kinetic modeling of Cu-SSZ-13 sulfation and desulfation for NH3-SCR applications

Abstract

A multi-site kinetic model was developed to predict the effect of sulfur dioxide on Cu-SSZ-13 for the NH3 selective catalytic reduction (NH3-SCR) of NOx. To develop a mechanism-based kinetic model, two different Cu sites were assumed describing the formation–decomposition of S intermediates i.e. copper bisulfite on ZCuOH (site 1, S1) and ammonium sulfate on Z2Cu (site 2, S2). Transient kinetics of SO2 interactions with Cu-SSZ-13 were simulated, exploiting SO2 and SO2 + NH3 temperature programmed desorption (TPD) experiments. Besides S1 and S2, a 3rd site was assumed to account for the Brønsted acid site and NH3 adsorption on that site. The model also accounts for NH3-SCR activity over fresh, sulfated and regenerated (at 550 °C) Cu-SSZ-13 samples with different Si : Al and Cu : Al ratios. Finally, the model was capable of describing fresh SCR for commercial and prepared samples without tuning any kinetic parameters, but by only varying ZCuOH and ZCu site densities obtained utilizing H2 temperature programmed reduction (H2-TPR) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

Graphical abstract: Mechanism-based kinetic modeling of Cu-SSZ-13 sulfation and desulfation for NH3-SCR applications

Supplementary files

Article information

Article type
Paper
Submitted
22 9月 2018
Accepted
26 10月 2018
First published
26 10月 2018

React. Chem. Eng., 2019,4, 1038-1049

Mechanism-based kinetic modeling of Cu-SSZ-13 sulfation and desulfation for NH3-SCR applications

Y. Jangjou, C. S. Sampara, Y. Gu, D. Wang, A. Kumar, J. Li and W. S. Epling, React. Chem. Eng., 2019, 4, 1038 DOI: 10.1039/C8RE00210J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements