Issue 46, 2023

Tribovoltaic effect promotes highly efficient direct current generator

Abstract

Currently, extremely high voltage output has been achieved by a direct current triboelectric nanogenerator (DC-TENG) based on semiconductor–semiconductor interfaces. DC-TENGs with metal–semiconductor interfaces are highly anticipated due to their potential advantages such as low cost, simpler structures, lower internal resistance, and wide selection of materials. Herein, we propose a DC-TENG with a metal–polymer–semiconductor interface and a dynamic Al/PVP/Si heterojunction, which produces a peak voltage of 26 V and exhibits a 5-fold improvement over reported Schottky DC-TENGs because the polyvinylpyrrolidone greatly increases the surface state density of silicon. During the reciprocating friction of the aluminum foil on the silicon substrate, the internal junction current generated by the directional movement of non-equilibrium carriers induced by friction always flows from Al to silicon, independent of the type of silicon, and thus can be used in self-powered electronic devices for continuously converting mechanical energy into electrical energy. Moreover, by introducing conventional dielectric polymer materials, a DC-TENG can be prepared as a dual-mode TENG for application in self-powered sensing. Our work presents for the first time the tribovoltaic effect at the metal–polymer–semiconductor interface, which may inspire further research on Schottky DC-TENGs and accelerate their practical application in self-powered systems.

Graphical abstract: Tribovoltaic effect promotes highly efficient direct current generator

Supplementary files

Article information

Article type
Paper
Submitted
11 8月 2023
Accepted
28 9月 2023
First published
10 10月 2023

J. Mater. Chem. A, 2023,11, 25377-25385

Tribovoltaic effect promotes highly efficient direct current generator

X. Pan, H. Xiang, Z. Xuan, Y. Jie and X. Cao, J. Mater. Chem. A, 2023, 11, 25377 DOI: 10.1039/D3TA04807A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements