Issue 8, 2020

Fluorinated solid additives enable high efficiency non-fullerene organic solar cells

Abstract

The use of processing additives to optimize the active layer morphology in organic solar cells (OSCs) is a simple and impactful way to improve photovoltaic performance. However, the retention of high boiling point liquid additives affects the stability and lifetime of OSCs, necessitating the development of volatilizable additives that can improve efficiency at no cost of the long-term device stability. In this study, three novel volatilizable solid additives, INB-1F, INB-3F, and INB-5F, with different degrees of fluorination, are rationally designed, synthesized and added into photovoltaic solutions to fabricate OSCs. These additives evaporate upon moderate thermal annealing and exhibit higher volatility as the number of fluorine atoms increases. Our device studies show that these additives can enhance the efficiency of PBDB-T-2F:BTP-4F binary cells from 15.2% to 16.5%, and that of PBDB-T-2F:IT-4F from 12.1% to 13.4%. Molecular dynamics simulations reveal attractive interactions between these additives and the non-fullerene acceptor BTP-4F, leading to enhanced intermolecular π–π stacking among BTP-4Fs, which is a favorable morphological change that we attribute to the origin of the enhanced performance and long-term stability. Our work presents a novel strategy to design new solid additives to replace liquid additives toward efficient and stable OSCs.

Graphical abstract: Fluorinated solid additives enable high efficiency non-fullerene organic solar cells

Supplementary files

Article information

Article type
Communication
Submitted
22 12月 2019
Accepted
12 2月 2020
First published
12 2月 2020

J. Mater. Chem. A, 2020,8, 4230-4238

Fluorinated solid additives enable high efficiency non-fullerene organic solar cells

J. Cai, H. Wang, X. Zhang, W. Li, D. Li, Y. Mao, B. Du, M. Chen, Y. Zhuang, D. Liu, H. Qin, Y. Zhao, J. A. Smith, R. C. Kilbride, A. J. Parnell, R. A. L. Jones, D. G. Lidzey and T. Wang, J. Mater. Chem. A, 2020, 8, 4230 DOI: 10.1039/C9TA13974E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements