Issue 23, 2017

Microwave-assisted synthesis of a nanoamorphous (Ni0.8,Fe0.2) oxide oxygen-evolving electrocatalyst containing only “fast” sites

Abstract

Nickel–iron oxyhydroxides (Ni1−xFexOOH) are non-precious metal electrocatalysts for the oxygen evolution reaction (OER) that have high efficiency in alkaline media. It has been suggested that the layered-double hydroxide (LDH) crystal structure of Ni0.8Fe0.2OOH contains two types of catalytic sites, “fast” Fe sites and “slow” Ni sites, which may limit the overall activity because only 20% of the catalytic surface is highly active. Herein, we report a facile microwave-assisted synthesis route of creating a nanoamorphous nickel–iron oxide electrocatalyst that contains only “fast” catalytic sites. Benchmarking experiments on flat electrodes (roughness factors <1.4) showed that the microwave-assisted, nanoamorphous (Ni0.8,Fe0.2) oxide had a low OER overpotential of 286 mV at a current density of 10 mA cm−2. We measured the kinetic rate constant of the active sites directly with the surface interrogation mode of scanning electrochemical microscopy (SI-SECM). We show that the microwave-assisted, nanoamorphous (Ni0.8,Fe0.2) oxide has only one type of catalytic site with an OER kinetic rate constant of 1.9 s−1 per site. We compared this to a crystalline Ni0.8Fe0.2OOH that was synthesized via electrochemical conditioning of crystalline Ni0.8:Fe0.2 oxide, and verified that the Ni0.8Fe0.2OOH contained two types of catalytic sites – “fast” sites with an OER rate constant of 1.3 s−1 per site and “slow” sites with an OER rate constant of 0.05 s−1 per site. The percentage of “fast” sites in the crystalline Ni0.8Fe0.2OOH was well matched to the total iron atom content, while 100% of the sites were “fast” in the microwave-assisted, nanoamorphous (Ni0.8,Fe0.2) oxide.

Graphical abstract: Microwave-assisted synthesis of a nanoamorphous (Ni0.8,Fe0.2) oxide oxygen-evolving electrocatalyst containing only “fast” sites

Supplementary files

Article information

Article type
Paper
Submitted
05 1月 2017
Accepted
14 3月 2017
First published
14 3月 2017

J. Mater. Chem. A, 2017,5, 11661-11670

Microwave-assisted synthesis of a nanoamorphous (Ni0.8,Fe0.2) oxide oxygen-evolving electrocatalyst containing only “fast” sites

J. M. Barforoush, D. T. Jantz, T. E. Seuferling, K. R. Song, L. C. Cummings and K. C. Leonard, J. Mater. Chem. A, 2017, 5, 11661 DOI: 10.1039/C7TA00151G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements