Issue 18, 2016

Design and synthesis of new ultra-low band gap thiadiazoloquinoxaline-based polymers for near-infrared organic photovoltaic application

Abstract

Two D–A copolymers, F1 and F2, with fluorene and thiazole units were substituted, respectively, on a thiadiazoloquinoxaline (TDQ) unit to enhance the electron-accepting strength of TDQ. The copolymers were synthesized by a cross-coupling Stille reaction and their optical and electrochemical properties were examined, which revealed that they have ultra-low band gaps and absorption in the near-infrared. These copolymers were employed as donors along with PC71BM as an electron acceptor for the fabrication of solution-processed bulk heterojunction (BHJ) polymer solar cells. After the optimization of the donor-to-acceptor weight ratio and the solvent additive (4 v% DIO as solvent additive), devices with F1:PC71BM and F2:PC71BM displayed power conversion efficiencies (PCEs) of 5.80% and 3.32%, respectively. Although F2 possesses a broader absorption profile compared with F1, the lower value of PCE for the F2-based device was attributed to the low LUMO offset between F2 and PC71BM, which limited the exciton dissociation. The abovementioned results indicate that these copolymers can be utilized for ternary BHJ and tandem solar cells to achieve a high PCE.

Graphical abstract: Design and synthesis of new ultra-low band gap thiadiazoloquinoxaline-based polymers for near-infrared organic photovoltaic application

Supplementary files

Article information

Article type
Communication
Submitted
18 11月 2015
Accepted
12 1月 2016
First published
15 1月 2016

RSC Adv., 2016,6, 14893-14908

Design and synthesis of new ultra-low band gap thiadiazoloquinoxaline-based polymers for near-infrared organic photovoltaic application

M. L. Keshtov, S. A. Kuklin, N. A. Radychev, A. Yu. Nikolaev, E. N. Koukaras, A. Sharma and G. D. Sharma, RSC Adv., 2016, 6, 14893 DOI: 10.1039/C5RA24364E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements