Issue 8, 2013

Critical considerations for the determination of nanoparticle number concentrations, size and number size distributions by single particle ICP-MS

Abstract

The metrological criteria for the implementation of the single particle inductively coupled plasma mass spectrometry (SP-ICPMS) methodology applied to nanoparticle size characterization and quantification have been investigated. The SP-ICPMS basis involves a process of counting events corresponding to individual nanoparticles, which requires (i) isolation of the contribution of the nanoparticles from that of the background/dissolved analyte, and (ii) avoiding the occurrence of multiple-nanoparticle events. A criterion based on three times the standard deviation of the continuous background (3σ) was selected as the threshold for discrimination of nanoparticle events from the background. Because the detectability of nanoparticles depends on both the size and number concentration, this 3σ criterion was also selected for detection of nanoparticles at the size detection limit and concentrations over the number concentration detection limit. However, at very low number concentrations, a less restrictive criterion must be used. The selection of a critical nanoparticle number concentration, based on the sample introduction and data acquisition parameters, allows the minimization of the occurrence of multiple-nanoparticle events, as well as controlling of the precision associated with the counting of nanoparticle events. Under such conditions, the standard uncertainty associated with the determination of number concentrations was 5%. The uncertainty for the determination of nanoparticle diameters was also studied, varying from 3 to 10% for diameters in the range of 100–40 nm, respectively. Reliable average number concentrations and sizes were obtained, although the number size distributions showed a significant broadening contribution due to the SP-ICPMS measurement process. The feasibility of SP-ICPMS for the implementation of the European Commission definition of "nanomaterial" was studied by analyzing commercial silver nanoparticle suspensions.

Graphical abstract: Critical considerations for the determination of nanoparticle number concentrations, size and number size distributions by single particle ICP-MS

Supplementary files

Article information

Article type
Paper
Submitted
25 3月 2013
Accepted
18 6月 2013
First published
18 6月 2013

J. Anal. At. Spectrom., 2013,28, 1220-1232

Critical considerations for the determination of nanoparticle number concentrations, size and number size distributions by single particle ICP-MS

F. Laborda, J. Jiménez-Lamana, E. Bolea and J. R. Castillo, J. Anal. At. Spectrom., 2013, 28, 1220 DOI: 10.1039/C3JA50100K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements