Issue 5, 2023

Bimetallic Fe–Co catalysts for the one step selective hydrogenation of CO2 to liquid hydrocarbons

Abstract

The direct conversion of CO2 to value-added products has received considerable attention as it can effectively mitigate CO2 emission and alleviate over-reliance on fossil fuels. We report the synthesis of a series of K-promoted Fe–Co bimetallic catalysts along with their performance for the selective hydrogenation of CO2 to liquid hydrocarbons (mostly linear α-olefins (LOAs)). High dispersion of K and Co on the catalysts was achieved through a modified one pot sol–gel approach. Both K and Co significantly influence catalyst activity and selectivity. By systematically studying the adsorption energies of key reactants on modeled iron oxide and carbide surfaces by density functional theory, we demonstrate that addition of K increases the affinity of the catalyst towards the adsorbed species. On the other hand, the presence of Co facilitates the spontaneous dissociation of H2. As a result of the high dispersion of components achieved through the one pot synthesis, at 300 °C, 20 bar (H2/CO2 = 2) and 7200 mL gcat.−1 h−1, the optimized catalyst exhibits a C5+ space time yield of 15.8 mmol gcat.−1 h−1 along with a C5+ selectivity of 51% at a CO2 conversion of 35%.

Graphical abstract: Bimetallic Fe–Co catalysts for the one step selective hydrogenation of CO2 to liquid hydrocarbons

Supplementary files

Article information

Article type
Paper
Submitted
01 11月 2022
Accepted
25 1月 2023
First published
25 1月 2023
This article is Open Access
Creative Commons BY-NC license

Catal. Sci. Technol., 2023,13, 1527-1540

Bimetallic Fe–Co catalysts for the one step selective hydrogenation of CO2 to liquid hydrocarbons

W. Wang, E. Toshcheva, A. Ramirez, G. Shterk, R. Ahmad, M. Caglayan, J. L. Cerrillo, A. Dokania, G. Clancy, T. B. Shoinkhorova, N. Hijazi, L. Cavallo and J. Gascon, Catal. Sci. Technol., 2023, 13, 1527 DOI: 10.1039/D2CY01880B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements