Issue 1, 2022

Formation of a nylon-6 micro/nano-fiber assembly through a low energy reactive melt spinning process

Abstract

Commercial synthetic fibers of below 10 μm in diameter are usually unachievable with conventional melt spinning technology using high molecular weight polymers as the starting materials. The electrospinning process is capable of forming nanoscale fibers but is usually accompanied by the use of 80–90 wt% organic solvents, which greatly reduces the fiber yield and increases process cost as well as causing environmental concerns. We describe herein an approach using the caprolactam monomer as the main starting material for reactive anionic polymerization, propagating the degree of polymerization to achieve suitable melt viscosity for drawing into ultra-fine fibers using an electrostatic field force. The process temperature was well below that of the nylon 6 melting point. We demonstrate that through this low energy consumption integrated process, essentially all monomers can be transformed into the final nylon-6 micro/nano fiber assemblies which was unattainable from prior industrial or research processes.

Graphical abstract: Formation of a nylon-6 micro/nano-fiber assembly through a low energy reactive melt spinning process

Supplementary files

Article information

Article type
Paper
Submitted
22 9月 2021
Accepted
15 11月 2021
First published
15 11月 2021

Green Chem., 2022,24, 176-190

Formation of a nylon-6 micro/nano-fiber assembly through a low energy reactive melt spinning process

R. Zhao, X. Meng, H. He, J. Ming and X. Ning, Green Chem., 2022, 24, 176 DOI: 10.1039/D1GC03468E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements