Issue 31, 2020

In situ encapsulated and well dispersed Co3O4 nanoparticles as efficient and stable electrocatalysts for high-performance CO2 reduction

Abstract

The development of appropriate catalysts with relatively low cost, good selectivity and excellent stability is one of the major issues in electrochemical reduction of CO2. In this work, an efficient electrocatalyst was fabricated via ultra-small Co3O4 nanoparticles encapsulated within the tip of carbon nanotubes, denoted as Co/CNTs. Benefiting from the synergistic effects of highly active Co3O4 nanoparticles and well-graphitized carbon nanotubes, Co/CNTs exhibited remarkable performance in CO2 electroreduction. In a conventional H-type cell, CO with a 90% faradaic efficiency and 20.6 mA cm−2 partial current density was obtained at only −0.7 VRHE cathode potential with 40 hour stability. Upon switching to a gas-diffusion device, the CO partial current density could reach as high as 232.6 mA cm−2 with >80% faradaic efficiency, which might be even comparable to that of state-of-the-art CO2 electrocatalysts. Our work could also provide a new strategy for developing non-noble metal catalysts for CO2 electroreduction.

Graphical abstract: In situ encapsulated and well dispersed Co3O4 nanoparticles as efficient and stable electrocatalysts for high-performance CO2 reduction

Supplementary files

Article information

Article type
Communication
Submitted
06 4月 2020
Accepted
16 6月 2020
First published
17 6月 2020

J. Mater. Chem. A, 2020,8, 15675-15680

In situ encapsulated and well dispersed Co3O4 nanoparticles as efficient and stable electrocatalysts for high-performance CO2 reduction

H. Yang, X. Yu, J. Shao, J. Liao, G. Li, Q. Hu, X. Chai, Q. Zhang, J. Liu and C. He, J. Mater. Chem. A, 2020, 8, 15675 DOI: 10.1039/D0TA03770B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements