Issue 2, 2020

The fabrication of activated carbon and metal-carbide 2D framework-based asymmetric electrodes for the capacitive deionization of Cr(vi) ions toward industrial wastewater remediation

Abstract

A new asymmetric pseudocapacitive deionization (CDI) cell was assembled with date seed-derived activated carbon (DSAC) as an anode and MAX (Ti3AlC2) as a cathode for the deionization of the Cr(VI) ions from industrial effluents. A simple pyrolysis method was used for the synthesis of mesoporous DSAC from the date-seed feedstock. The commercially available Ti3AlC2 possessed stacked multilayered arrangements of metal-carbide 2D frameworks with a specific capacitance of 347 F g−1 in a 1 M Na2SO4 solution at a scan rate of 10 mV s−1 with excellent stability and low internal resistance. The designed asymmetric DSAC//MAX-based CDI system exhibited high Cr(VI) adsorption capacity of 38.6 mg g−1 with high removal efficiency and significant regeneration behavior at 1.2 V in a 120 mg L−1 Cr(VI) solution at neutral pH. In this asymmetric CDI system, DSAC generated hydrogen ions via electrolysis of water, which contributed to the reduction of the Cr(VI) ions. Furthermore, the toxic Cr(VI) ions were electrochemically converted into Cr(III) on the surface of the stacked layers of Ti3AlC2. The present work shows the potential of using an asymmetric DSAC//MAX-based CDI system for the abstraction of hazardous pollutants from industrial effluents.

Graphical abstract: The fabrication of activated carbon and metal-carbide 2D framework-based asymmetric electrodes for the capacitive deionization of Cr(vi) ions toward industrial wastewater remediation

Article information

Article type
Paper
Submitted
11 9月 2019
Accepted
15 10月 2019
First published
16 10月 2019

Environ. Sci.: Water Res. Technol., 2020,6, 351-361

The fabrication of activated carbon and metal-carbide 2D framework-based asymmetric electrodes for the capacitive deionization of Cr(VI) ions toward industrial wastewater remediation

G. Bharath, A. Hai, K. Rambabu, D. Savariraj, Y. Ibrahim and F. Banat, Environ. Sci.: Water Res. Technol., 2020, 6, 351 DOI: 10.1039/C9EW00805E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements