Issue 35, 2019

Solution-processable zinc oxide nanorods and a reduced graphene oxide hybrid nanostructure for highly flexible and stable memristor

Abstract

Low-dimensional nanomaterials have attracted increasing attention in flexible electronics designing due to their extraordinary electrical and mechanical properties. In this communication, one dimensional (1D) zinc oxide nanorods (ZnO NRs) and a two dimensional (2D) reduced graphene oxide hybrid nanostructure were synthesized via a solution-processable strategy. The hybrid nanostructure based memristor possessed a non-volatile flash memory feature that is ascribed to the formation and rupture of oxygen-vacancy-assisted conductive filaments. The concentrated resistance and switching voltage may result from the facile formation of straight and extensible conductive filaments along ZnO NRs. Impressively, the device can operate without significant degradation in electrical performance when undergoing mechanical bending for 1000 cycles with a small bending radius of 6 mm. The insight gained from this communication may afford new opportunities for design of high-performance flexible memory electronics.

Graphical abstract: Solution-processable zinc oxide nanorods and a reduced graphene oxide hybrid nanostructure for highly flexible and stable memristor

Supplementary files

Article information

Article type
Communication
Submitted
16 7月 2019
Accepted
02 8月 2019
First published
05 8月 2019

J. Mater. Chem. C, 2019,7, 10764-10768

Solution-processable zinc oxide nanorods and a reduced graphene oxide hybrid nanostructure for highly flexible and stable memristor

Z. Zhou, F. Xiu, T. Jiang, J. Xu, J. Chen, J. Liu and W. Huang, J. Mater. Chem. C, 2019, 7, 10764 DOI: 10.1039/C9TC03840J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements