Issue 2, 2019

Immobilized tetrakis(triphenylphosphine)palladium(0) for Suzuki–Miyaura coupling reactions under flow conditions

Abstract

An immobilized triphenylphosphine scaffold was prepared by precipitation polymerization and functionalized to afford a cost-effective source of solid-supported tetrakis(triphenylphosphine)palladium(0). The catalyst was characterised and used to perform biphasic Suzuki–Miyaura cross-coupling reactions using a packed-bed reactor under flow conditions. The approach afforded comparable yields to those obtained under batch conditions with a single pass through the packed-bed reactor (1 h vs. 18 h). The use of a recycling system was investigated on a model reaction and found to afford close to quantitative conversion within 3 hours.

Graphical abstract: Immobilized tetrakis(triphenylphosphine)palladium(0) for Suzuki–Miyaura coupling reactions under flow conditions

Supplementary files

Article information

Article type
Paper
Submitted
02 10月 2018
Accepted
03 12月 2018
First published
03 12月 2018

React. Chem. Eng., 2019,4, 372-382

Immobilized tetrakis(triphenylphosphine)palladium(0) for Suzuki–Miyaura coupling reactions under flow conditions

G. V. Ramaotsoa, I. Strydom, J. Panayides and D. Riley, React. Chem. Eng., 2019, 4, 372 DOI: 10.1039/C8RE00235E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements