Issue 23, 2017

Hybrid Na–air flow batteries using an acidic catholyte: effect of the catholyte pH on the cell performance

Abstract

Metal–air batteries show great promise because of their high theoretical energy density resulting from the use of an unlimited, low-mass O2 gaseous reactant. Nevertheless, several issues remain to be tackled for their practical implementation in ambient air. In this work, we constructed a hybrid-type Na–air battery with a flow-through configuration for direct use of ambient oxygen as the cathode, and studied the effect of the flow of the aqueous catholyte on its electrochemical properties. In addition, the effect of the catholyte pH on the open-circuit and discharge–charge voltage behavior of the hybrid Na–air battery was systematically investigated. An enhanced operation voltage was found for the flow cell using an acidic catholyte composed of 1 M NaNO3 and 0.1 M citric acid (pH = ∼1.8). Further improvement in the cell performance was observed in a cell employing both Pt/C and IrO2 electrocatalysts, which showed an average voltage gap of ∼0.4 V between the charge (∼3.7 V) and discharge (∼3.3 V) voltages vs. Na+/Na at a current rate of 0.1 mA cm−2 over 20 cycles (200 h total). These findings suggest that the hybrid Na–air battery system using a flow-through mode and an acidic catholyte could be a promising way to achieve practical Na–air cells with desirable performance.

Graphical abstract: Hybrid Na–air flow batteries using an acidic catholyte: effect of the catholyte pH on the cell performance

Supplementary files

Article information

Article type
Paper
Submitted
12 1月 2017
Accepted
07 3月 2017
First published
08 3月 2017

J. Mater. Chem. A, 2017,5, 11592-11600

Hybrid Na–air flow batteries using an acidic catholyte: effect of the catholyte pH on the cell performance

S. M. Hwang, W. Go, H. Yu and Y. Kim, J. Mater. Chem. A, 2017, 5, 11592 DOI: 10.1039/C7TA00400A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements