Issue 47, 2023

Yield stress-enabled microencapsulation of field responsive microparticle suspensions

Abstract

Try and encapsulate microparticles inside the cores of microcapsules and you will often find that particles adhere to the liquid–liquid interface in a phenomenon known as Pickering stabilization. Particles will remain irreversibly trapped and embedded within the subsequently formed microcapsule membrane. In cases where the encapsulant particles must remain suspended inside the microcapsule core to retain their desired properties or behaviours, Pickering stabilization is detrimental. Here we demonstrate a general procedure using yield stress materials as the core material, where the yield stress of the gel is strong enough to suspend particles against sedimentation, but weak enough to allow spatial manipulation of encapsulant particles using an external field. This external field imparts enough force on particles to disrupt the supporting network and allow particle mobility after encapsulation.

Graphical abstract: Yield stress-enabled microencapsulation of field responsive microparticle suspensions

Supplementary files

Article information

Article type
Paper
Submitted
16 5月 2023
Accepted
10 10月 2023
First published
12 10月 2023
This article is Open Access
Creative Commons BY-NC license

Soft Matter, 2023,19, 9139-9145

Yield stress-enabled microencapsulation of field responsive microparticle suspensions

S. R. Wilson-Whitford, M. C. Roffin, J. Gao, T. Kaewpetch and J. F. Gilchrist, Soft Matter, 2023, 19, 9139 DOI: 10.1039/D3SM00642E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements