Issue 1, 2022

Ru nanoparticles supported on alginate-derived graphene as hybrid electrodes for the hydrogen evolution reaction

Abstract

The development of organic–inorganic hybrid materials for redox catalysis is key to access new energy conversion schemes and the sustainable production of dihydrogen. Here, bare and P-doped graphene arising from the pyrolysis of biomass (alginate from marine algae) has been used as a support for the growth and stabilization of ultra-small Ru/RuO2 NPs through organometallic synthesis. P-doped graphene allows obtaining smaller and better dispersed NPs in hybrid electrodes of lower roughness and electroactive surface area. Electrochemical activation of the as-synthesised supported nanoparticles by reduction of the passivating RuO2 layer generates excellent HER electrocatalysts under acidic conditions (η10 of 29 mV and 15 mV for the bare and P-doped electrodes, respectively). P doping, identified as surface phosphates by 31P solid state NMR, induces improvement of all HER benchmarking parameters studied, including overpotential and exchange and specific current densities. All studied materials show excellent long-term stability and selectivity for hydrogen generation with no sign of deactivation after 12 h under turnover conditions and almost quantitative faradaic efficiencies.

Graphical abstract: Ru nanoparticles supported on alginate-derived graphene as hybrid electrodes for the hydrogen evolution reaction

Supplementary files

Article information

Article type
Paper
Submitted
02 11月 2021
Accepted
16 11月 2021
First published
17 11月 2021

New J. Chem., 2022,46, 49-56

Ru nanoparticles supported on alginate-derived graphene as hybrid electrodes for the hydrogen evolution reaction

L. Mallón, C. Cerezo-Navarrete, N. Romero, M. Puche, J. García-Antón, R. Bofill, K. Philippot, L. M. Martínez-Prieto and X. Sala, New J. Chem., 2022, 46, 49 DOI: 10.1039/D1NJ05215B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements