Mechanism and application of surface-initiated ATRP in the presence of a Zn0 plate

Rebecca Faggion Albers; Wenqing Yan; Matteo Romio; Edson R. Leite; Nicholas D. Spencer; Krzysztof Matyjaszewski; Edmondo M. Benetti

doi:10.1039/D0PY01233E

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Mechanism and application of surface-initiated ATRP in the presence of a Zn⁰ plate†

Rebecca Faggion Albers,

^abcd Wenqing Yan,^b Matteo Romio,^bc Edson R. Leite,^de Nicholas D. Spencer,

^b Krzysztof Matyjaszewski^f and Edmondo M. Benetti

*^bc

Author affiliations

* Corresponding authors

^a Complex Materials, Department of Materials, ETH Zürich, Vladimir-Prelog-Weg 1-5/10, CH-8093 Zurich, Switzerland

^b Laboratory for Surface Science and Technology, Department of Materials, ETH Zürich, Vladimir-Prelog-Weg 1-5/10, CH-8093 Zurich, Switzerland
E-mail: edmondo.benetti@mat.ethz.ch

^c Swiss Federal Laboratories for Materials Science and Technology (Empa), Lerchenfeldstrasse 5, St. Gallen, Switzerland

^d Department of Chemistry, Federal University of São Carlos, 13565-905 São Carlos, SP, Brazil

^e Brazilian Nanotechnology National Laboratory (LNNano), Brazilian Center for Research in Energy and Materials (CNPEM), 13083-970 Campinas, Brazil

^f Department of Chemistry, Carnegie Mellon University, 4400 Fifth Avenue, Pittsburgh, USA

Abstract

Surface-initiated atom transfer radical polymerization in the presence of a Zn⁰ plate (SI-Zn⁰-ATRP) enables the rapid synthesis of chemically diverse polymer brushes from both planar inorganic supports, and fabrics made of natural fibers. This process enables the controlled formation of polymer-brush layers on a variety of substrates, without the need for either inert conditions or lengthy deoxygenation procedures of the reaction mixtures.

This article is part of the themed collection: Polymer Chemistry Pioneering Investigators 2021

Download options Please wait...

Supplementary files

Supplementary information PDF (562K)

Article information

DOI: https://doi.org/10.1039/D0PY01233E
Article type: Communication
Submitted: 30 8月 2020
Accepted: 23 10月 2020
First published: 23 10月 2020
This article is Open Access

Download Citation

Polym. Chem., 2020,11, 7009-7014

Permissions

Request permissions

Mechanism and application of surface-initiated ATRP in the presence of a Zn⁰ plate

R. Faggion Albers, W. Yan, M. Romio, E. R. Leite, N. D. Spencer, K. Matyjaszewski and E. M. Benetti, Polym. Chem., 2020, 11, 7009 DOI: 10.1039/D0PY01233E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Polymer Chemistry