Issue 4, 2019

All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics

Abstract

Flexible and wearable strain sensors with high stretchability and high sensitivity have been studied intensively. However, the achievement of low-cost, rapid mass production and high performance of wearable strain sensors remains a challenge. In this study, Ag nanodendrite (ND) inks with good printability for varieties of substrates are prepared, which can be directly screen-printed onto nitrile rubber to manufacture strain sensors. Printed strain sensors (PSSs) with diverse working strain ranges and sensitivities can be simultaneously obtained by printing versatile geometric patterns. Comparatively, straight-line PSSs with a linewidth of 2 mm exhibit high electrical conductivity (1.14 × 105 S m−1), a large sensing range (105%), high sensitivity (maximum gauge factor = 294.3), an ultrafast response time (18 ms), and long-term stability (more than three weeks). Additionally, the sensing mechanism of the PSSs is further investigated by observing their surface topographies. Eventually, a smart glove based on PSSs is used for monitoring human motion (finger bending, wrist bending, walking, etc.) and gesture actions, demonstrating the potential applications of Ag ND-based PSSs in wearable electronic devices and human–machine interaction intelligent systems.

Graphical abstract: All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics

Supplementary files

Article information

Article type
Communication
Submitted
20 ⵛⵓⵜ 2018
Accepted
29 ⵏⵓⵡ 2018
First published
04 ⴷⵓⵊ 2018

J. Mater. Chem. C, 2019,7, 809-818

All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics

B. Tian, W. Yao, P. Zeng, X. Li, H. Wang, L. Liu, Y. Feng, C. Luo and W. Wu, J. Mater. Chem. C, 2019, 7, 809 DOI: 10.1039/C8TC04753G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements