Issue 4, 2017

Controlled synthesis of Mo-doped Ni3S2 nano-rods: an efficient and stable electro-catalyst for water splitting

Abstract

Fabrication of stable, efficient, and inexpensive bifunctional electro-catalysts for water splitting has become increasingly attractive. Herein, for the first time, the direct growth of Mo-doped Ni3S2 on Ni foams using sodium molybdate as the Mo source at different temperatures is demonstrated. Effects of temperature on the morphology and water splitting performance of Mo-doped Ni3S2 were discussed in detail. It is found that the atomic stoichiometric ratios of Mo and Ni can be controlled by the adjusting of reaction temperature, while the obtained electro-catalysts demonstrate various morphologies, capacitances and chemisorption free energies of hydrogen, which lead to different current densities and hydrogen evolution efficiencies. The electro-catalyst synthesized at 200 °C (200-SMN/NF) demonstrates the best regular morphology and electrochemical properties. When employed in oxygen evolution reactions, 200-SMN/NF demonstrates a low over-potential of 180 mV at 100 mA cm−2. Adapting it as a bifunctional electro-catalyst, a current density of 10 mA cm−2 at a very low cell voltage of 1.53 V and cycling lifespan of more than 15 h was delivered. Further results indicated elevated hydrogen evolution reaction activity, consisting of a moderate 278 mV over-potential at a 100 mA cm−2 hydrogen production current density, a small 72.9 mV dec−1 Tafel slope, and a superior current density compared to that of precious catalyst Pt/C (40%) after −0.53 V. These results underscore the fact that 200-SMN/NF is a high-performance, precious-metal-free electro-catalyst, and provide the foundation for exciting opportunities in water splitting applications.

Graphical abstract: Controlled synthesis of Mo-doped Ni3S2 nano-rods: an efficient and stable electro-catalyst for water splitting

Supplementary files

Article information

Article type
Paper
Submitted
14 ⵏⵓⵡ 2016
Accepted
02 ⴷⵓⵊ 2016
First published
02 ⴷⵓⵊ 2016

J. Mater. Chem. A, 2017,5, 1595-1602

Controlled synthesis of Mo-doped Ni3S2 nano-rods: an efficient and stable electro-catalyst for water splitting

Z. Cui, Y. Ge, H. Chu, R. Baines, P. Dong, J. Tang, Y. Yang, P. M. Ajayan, M. Ye and J. Shen, J. Mater. Chem. A, 2017, 5, 1595 DOI: 10.1039/C6TA09853C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements