Issue 17, 2016

Assembling substrate-less plasmonic metacrystals at the oil/water interface for multiplex ultratrace analyte detection

Abstract

Current substrate-less SERS platforms are limited to uncontrolled aggregation of plasmonic nanoparticles or quasi-crystalline arrays of spherical nanoparticles, with no study on how the lattice structures formed by nanoparticle self-assembly affect their detection capabilities. Here, we organize Ag octahedral building blocks into two large-area plasmonic metacrystals at the oil/water interface, and investigate their in situ SERS sensing capabilities. Amphiphilic octahedra assemble into a hexagonal close-packed metacrystal, while hydrophobic octahedra assemble into an open square metacrystal. The lower packing density square metacrystal gives rise to much stronger SERS enhancement than the denser packing hexagonal metacrystal, arising from the larger areas of plasmonic hotspots within the square metacrystal at the excitation wavelength. We further demonstrate the ability of the square metacrystal to achieve quantitative ultratrace detection of analytes from both the aqueous and organic phases. Detection limits are at the nano-molar levels, with analytical enhancement factors reaching 108. In addition, multiplex detection across both phases can be achieved in situ without any loss of signal quantitation.

Graphical abstract: Assembling substrate-less plasmonic metacrystals at the oil/water interface for multiplex ultratrace analyte detection

Supplementary files

Article information

Article type
Paper
Submitted
30 ⵎⴰⵢ 2016
Accepted
04 ⵢⵓⵍ 2016
First published
04 ⵢⵓⵍ 2016

Analyst, 2016,141, 5107-5112

Assembling substrate-less plasmonic metacrystals at the oil/water interface for multiplex ultratrace analyte detection

Y. H. Lee, H. K. Lee, J. Y. C. Ho, Y. Yang and X. Y. Ling, Analyst, 2016, 141, 5107 DOI: 10.1039/C6AN01239F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements