Issue 16, 2014

Nitrogen doped graphene: influence of precursors and conditions of the synthesis

Abstract

Heteroatoms doped graphenes, especially nitrogen doped graphenes, have attracted much attention due to their remarkable performance as parts of lithium-ion batteries, advanced catalyst supports, super capacitors and fuel cells. The performance of doped materials strongly depends on the level of doping. While the nitrogen doped graphenes are synthesized by various methods, the parameters influencing the level of doping are seldom studied. Here we prepare nitrogen doped graphenes by exfoliation of different graphite oxides (i.e. Staudenmaier, Hofmann and Hummers) in an ammonia atmosphere at various exfoliation temperatures (i.e. 600 °C, 800 °C and 1000 °C). We study the efficiency of nitrogen doping using characterization methods such as scanning electron microscopy, Raman spectroscopy, combustible elemental analysis and X-ray photoelectron spectroscopy. We show that the level of doping strongly depends on the type of the starting graphite oxide. This has very important implication on the fabrication of doped graphenes and we suggest that the graphite oxide preparation route must be always considered when one performs heteroatom doping of graphenes via a thermal exfoliation route. In addition, we present an optimized, scalable technique for fabrication of large quantities of highly nitrogen doped (>7 at.%) graphenes.

Graphical abstract: Nitrogen doped graphene: influence of precursors and conditions of the synthesis

Supplementary files

Article information

Article type
Paper
Submitted
28 ⵏⵓⵡ 2013
Accepted
30 ⵉⵏⵏ 2014
First published
13 ⵎⴰⵕ 2014

J. Mater. Chem. C, 2014,2, 2887-2893

Author version available

Nitrogen doped graphene: influence of precursors and conditions of the synthesis

L. Wang, Z. Sofer, J. Luxa and M. Pumera, J. Mater. Chem. C, 2014, 2, 2887 DOI: 10.1039/C3TC32359E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements