A microporous metal–organic framework assembled from an aromatic tetracarboxylate for H2 purification

Yabing He; Shengchang Xiang; Zhangjing Zhang; Shunshun Xiong; Chuande Wu; Wei Zhou; Taner Yildirim; Rajamani Krishna; Banglin Chen

doi:10.1039/C2TA01260J

A microporous metal–organic framework assembled from an aromatic tetracarboxylate for H₂ purification†

Yabing He,^a Shengchang Xiang,^b Zhangjing Zhang,^b Shunshun Xiong,^a Chuande Wu,^c Wei Zhou,^de Taner Yildirim,^df Rajamani Krishna*^g and Banglin Chen*^a

Author affiliations

* Corresponding authors

^a Department of Chemistry, University of Texas at San Antonio, One UTSA Circle, San Antonio, Texas 78249-0698, USA
E-mail: Banglin.Chen@utsa.edu
Fax: +1-210-458-7428

^b Fujian Provincial Key Laboratory of Polymer Materials, Fujian Normal University, 3 Shangsan Road, Cangshang Region, Fuzhou 350007, China

^c Department of Chemistry, Zhejiang University, Hangzhou 310027, China

^d NIST Center for Neutron Research, Gaithersburg, Maryland 20899-6102, USA

^e Department of Materials Science and Engineering, University of Maryland, College Park, Maryland 20742, USA

^f Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6272, USA

^g Van't Hoff Institute of Molecular Science, University of Amsterdam, Science Park 904, 1098 XH Amsterdam, The Netherlands
E-mail: r.krishna@uva.nl

Abstract

A NbO-type metal–organic framework UTSA-40 constructed from a novel aromatic tetracarboxylate has been synthesized and structurally characterized. With open metal sites, suitable pore spaces and a moderate BET surface area of 1630 m² g⁻¹ for the recognition of CO₂ and CH₄, the activated UTSA-40a has the potential for use in H₂ purification processes conducted in fixed bed adsorbers, with higher productivities and lower regeneration costs than those obtained with conventionally used NaX and LTA-5A zeolites when operating at higher pressure. Furthermore, its regeneration cost is also lower than that of the examined MOFs MgMOF-74 and Cu-TDPAT despite its lower productivity.

This article is part of the themed collection: 2013 Journal of Materials Chemistry A Hot Papers

Supplementary files

Article information

DOI: https://doi.org/10.1039/C2TA01260J
Article type: Paper
Submitted: 26 ⵏⵓⵡ 2012
Accepted: 11 ⴷⵓⵊ 2012
First published: 12 ⴷⵓⵊ 2012

Download Citation

J. Mater. Chem. A, 2013,1, 2543-2551

Permissions

Request permissions

A microporous metal–organic framework assembled from an aromatic tetracarboxylate for H₂ purification

Y. He, S. Xiang, Z. Zhang, S. Xiong, C. Wu, W. Zhou, T. Yildirim, R. Krishna and B. Chen, J. Mater. Chem. A, 2013, 1, 2543 DOI: 10.1039/C2TA01260J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Journal of Materials Chemistry A