Issue 18, 2016

Binder-free graphene as an advanced anode for lithium batteries

Abstract

We report the fabrication of binder-free anodes for lithium-ion batteries (LIBs) based on graphene nanoflakes on-demand designed and produced by liquid phase exfoliation of graphite. A solvent exchange process is exploited to first remove the N-methyl-2-pyrrolidone used for the exfoliation of graphite and then to re-disperse the exfoliated single-(SLG) and few-layer (FLG) graphene flakes, at a high concentration (∼5 g L−1), in an environmentally friendly solvent, i.e., ethanol. Anodes are realized by drop-casting the SLG- and FLG-based ink in ethanol under ambient conditions on a Cu foil without any binder or conductive agents, typically used for the fabrication of conventional LIBs. We tested our SLG- and FLG-based anodes in a half-cell configuration, achieving a reversible specific capacity of ∼500 mA h g−1 after 100 cycles at a current density of 0.1 A g−1, with coulombic efficiency >99.5%. We also tested the SLG- and FLG-based anode in a full-cell configuration, exploiting commercial LiNi0.5Mn1.5O4 as a cathode. The battery operates around 4.7 V with a flat-plateau voltage profile and a reversible specific capacity of ∼100 mA h g−1. The proposed electrode fabrication process is fast, low cost and industrially scalable opening the way to the optimization of energy and power densities, lifetime and safety of LIBs, while minimizing their cost and environmental impact.

Graphical abstract: Binder-free graphene as an advanced anode for lithium batteries

Article information

Article type
Paper
Submitted
24 ⴽⵜⵓ 2015
Accepted
24 ⴷⵓⵊ 2015
First published
24 ⴷⵓⵊ 2015

J. Mater. Chem. A, 2016,4, 6886-6895

Author version available

Binder-free graphene as an advanced anode for lithium batteries

H. Sun, A. E. Del Rio Castillo, S. Monaco, A. Capasso, A. Ansaldo, M. Prato, D. A. Dinh, V. Pellegrini, B. Scrosati, L. Manna and F. Bonaccorso, J. Mater. Chem. A, 2016, 4, 6886 DOI: 10.1039/C5TA08553E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements