Issue 6, 2013

A sulfur-assisted strategy to decorate MWCNTs with highly dispersed Pt nanoparticles for counter electrode in dye-sensitized solar cells

Abstract

A novel strategy was introduced to prepare hybrid nanomaterials of platinum nanoparticles and multi-walled carbon nanotubes (Pt–MWCNTs). A thin layer of sulfur on MWCNTs could absorb and bind the Pt precursors from solution on the MWCNTs’ surface and also restrict their particle growth during reduction which resulted in ultrafine dispersions of metal nanocrystallites due to the strong affinity of sulfur for noble metals. The composite material was applied as the counter electrode (Pt–MWCNTs CE) for dye-sensitized solar cells (DSCs) and the fill factor (FF) and power-conversion efficiency (η) of the DSC with Pt–MWCNTs CE were 0.63 and 7.69%, respectively. The corresponding values of the DSC with bare Pt CE were 0.55 and 6.31%. The morphology and elemental composition of Pt–MWCNTs were characterized by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The dispersion and attachment of Pt nanoparticles on the surface of MWCNTs were observed by transmission electron microscopy (TEM). Electrochemical impedance spectra (EIS), Tafel polarization measurement and cyclic voltammetry (CV) were performed to characterize the catalytic activities of this hybrid CE.

Graphical abstract: A sulfur-assisted strategy to decorate MWCNTs with highly dispersed Pt nanoparticles for counter electrode in dye-sensitized solar cells

Article information

Article type
Paper
Submitted
06 ⵏⵓⵡ 2012
Accepted
01 ⴷⵓⵊ 2012
First published
03 ⴷⵓⵊ 2012

J. Mater. Chem. A, 2013,1, 1982-1986

A sulfur-assisted strategy to decorate MWCNTs with highly dispersed Pt nanoparticles for counter electrode in dye-sensitized solar cells

J. W. Guo, B. Zhang, Y. Hou, S. Yang, X. H. Yang and H. G. Yang, J. Mater. Chem. A, 2013, 1, 1982 DOI: 10.1039/C2TA01003H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements