The impact of flash sintering on densification and plasticity of strontium titanate: High heating rates, dislocation nucleation and plastic flow

Wolfgang Rheinheimer, Xin Li Phuah, Lukas Porz, Michael Scherer, Jaehun Cho and Haiyan Wang

Journal of the European Ceramic Society, 2023, 43, 3524
DOI: 10.1016/j.jeurceramsoc.2023.02.007

Laser sintering enables the room-temperature fabrication of electrodes for an electrolyte-supported solid oxide fuel cell (SOFC)

Chunbo He, Chaozhong Wang, Chunhui Wang, Haoran Zhao, Jiupai Ni and Chengsheng Ni

Journal of the European Ceramic Society, 2026, 46, 118189
DOI: 10.1016/j.jeurceramsoc.2026.118189

Flash sintering in oxides: The Debye temperature is not the limit

Daniil Lewin and Doru C. Lupascu

Acta Materialia, 2026, 306, 121945
DOI: 10.1016/j.actamat.2026.121945

Blacklight sintering of garnet-based composite cathodes

Walter Sebastian Scheld, Julian N. Ebert, Michael Scherer, Lovro Fulanovic, Lukas Porz, Christian Dellen, Martin Ihrig, Sven Uhlenbruck, Martin Finsterbusch, Olivier Guillon, Dina Fattakhova-Rohlfing and Wolfgang Rheinheimer

Journal of the European Ceramic Society, 2024, 44, 3039
DOI: 10.1016/j.jeurceramsoc.2023.12.040

Enhancing the electrochemical performance of Ni-based electrodes via flash light sintering for metal-supported solid oxide fuel cells (MS-SOFCs)

Jisung Yoon, Junghum Park, Hojae Lee, Sang won Lee, Miju Ku, Junseop Lee, Jonghyuck Lee, Tae ho Shin and Young-Beom Kim

Chinese Journal of Structural Chemistry, 2025, 44, 100758
DOI: 10.1016/j.cjsc.2025.100758

Review of the opportunities and limitations for powder-based high-throughput solid-state processing of advanced functional ceramics

Kyle G. Webber, Oliver Clemens, Vincenzo Buscaglia, Barbara Malič, Rajendra K. Bordia, Tobias Fey and Udo Eckstein

Journal of the European Ceramic Society, 2024, 44, 116780
DOI: 10.1016/j.jeurceramsoc.2024.116780

Microstructure and conductivity of blacklight‐sintered TiO2, YSZ, and Li0.33La0.57TiO3

Lukas Porz, Michael Scherer, Qaisar Khushi Muhammad, Kimitaka Higuchi, Yan Li, Shuhei Koga, Atsutomo Nakamura, Wolfgang Rheinheimer and Till Frömling

J Am Ceram Soc., 2022, 105, 7030
DOI: 10.1111/jace.18686

Reactive FAST/SPS sintering of strontium titanate as a tool for grain boundary engineering

M. Pascal Zahler, Dylan Jennings, Moritz Kindelmann, Olivier Guillon and Wolfgang Rheinheimer

Journal of the European Ceramic Society, 2023, 43, 6925
DOI: 10.1016/j.jeurceramsoc.2023.07.021

Ultra-rapid, pressureless, and optically instrumented manufacturing of high-performance ceramics

Thomas Grippi, Andrii L. Maximenko, Elisa Torresani and Eugene A. Olevsky

Journal of the European Ceramic Society, 2026, 46, 117992
DOI: 10.1016/j.jeurceramsoc.2025.117992

Progress in percolative composites with negative permittivity for applications in electromagnetic interference shielding and capacitors

Zhong Leng, Zhenyu Yang, Xinxue Tang, Mohamed H. Helal, Yunpeng Qu, Peitao Xie, Zeinhom M. El-Bahy, Shuwei Meng, Mohamed M. Ibrahim, Changyou Yu, Hassan Algadi, Chunzhao Liu and Yao Liu

Adv Compos Hybrid Mater, 2023, 6
DOI: 10.1007/s42114-023-00778-2

High heating rate effects in sintering: A phase-field study of La-doped alumina

Marco Seiz and Tomohiro Takaki

Materials & Design, 2025, 259, 114889
DOI: 10.1016/j.matdes.2025.114889

Reactive Flash Sintering of Ceramics: A Review

Bola Yoon, Viviana Avila, Isabela R. Lavagnini, João V. Campos and Lílian M. Jesus

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202200731

Ultra-fast sintering and grain boundary metastability in ceramics

Mattia Biesuz and Levent Karacasulu

Current Opinion in Solid State and Materials Science, 2026, 42, 101258
DOI: 10.1016/j.cossms.2026.101258

An interface nucleation rate limited sintering kinetic model applied to in situ sintering Al2O3-SmAlO3 composites

Shen J. Dillon, Yonghui Ma, Eric Lang, Jia-hu Ouyang and Khalid Hattar

Journal of the European Ceramic Society, 2023, 43, 3465
DOI: 10.1016/j.jeurceramsoc.2023.02.058

Exploration of UHS scalability by SPS approach: Multiphysics simulation, critical dimensions, mechanisms and properties

Flavie Lebas, Levent Karacasulu, Mattia Biesuz, Jérôme Lecourt, Christelle Bilot, Sylvain Marinel and Charles Manière

Journal of the European Ceramic Society, 2026, 46, 117865
DOI: 10.1016/j.jeurceramsoc.2025.117865

A Perspective on Emerging and Future Sintering Technologies of Ceramic Materials

Olivier Guillon, Wolfgang Rheinheimer and Martin Bram

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202201870

Ultrafast high-temperature sintering of yttria-stabilized zirconia in reactive N2 atmosphere

Levent Karacasulu, Thomas Hérisson de Beauvoir, Emanuele De Bona, Michele Cassetta, Cekdar Vakifahmetoglu, Vincenzo M. Sglavo, Mauro Bortolotti, Charles Manière, Claude Estournès and Mattia Biesuz

Journal of the European Ceramic Society, 2025, 45, 116879
DOI: 10.1016/j.jeurceramsoc.2024.116879

Understanding the origin of lithium dendrite branching in Li6.5La3Zr1.5Ta0.5O12 solid-state electrolyte via microscopy measurements

Can Yildirim, Florian Flatscher, Steffen Ganschow, Alice Lassnig, Christoph Gammer, Juraj Todt, Jozef Keckes and Daniel Rettenwander

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-52412-4

Synchrotron X‐ray multiscale tomography: Visualization of heterogeneous microstructures and defects in ceramics

Gaku Okuma and Fumihiro Wakai

J Am Ceram Soc., 2024, 107, 1706
DOI: 10.1111/jace.19366

Mechanistic elucidation of cold sintering behavior in SrFe12O19 ceramics: Role of transient solvent, temperature, and particle morphology

Siyuan Wang, Wei Cai, WenJin Wu, Huasong Liu, Jianwei Zheng, Liang Qiao, Yao Ying, Juan Li, Jing Yu, Naoki Wakiya, Jingwu Zheng and Shenglei Che

Journal of the European Ceramic Society, 2026, 46, 118204
DOI: 10.1016/j.jeurceramsoc.2026.118204

Sintering Under High Heating Rates

Levent Karacasulu, Charles Manière, Cekdar Vakifahmetoglu, Sylvain Marinel and Mattia Biesuz

Annual Review of Materials Research, 2025, 55, 203
DOI: 10.1146/annurev-matsci-080323-042441

Temperature-dependent bandgap renormalization in ZnO ceramics sintered using concentrated solar energy

Xuesong Zhang, Jikun Ma, Junlin Zhang, Yan Wang, Dongqiang Lei and Zhifeng Wang

Applied Physics Letters, 2026, 128
DOI: 10.1063/5.0303766

Coexistence of multi-scale domains in ferroelectric polycrystals with non-uniform grain-size distributions

Katharina Wolk, Ruben S. Dragland, Elvia Chavez Panduro, Michael E. Hjelmstad, Leonie Richarz, Zewu Yan, Edith Bourret, Kasper A. Hunnestad, Christian Tzschaschel, Jan Schultheiß and Dennis Meier

Matter, 2024, 7, 3097
DOI: 10.1016/j.matt.2024.04.041

Blacklight sintering of BaZrO3-based proton conductors

Julian N. Ebert, Dylan Jennings, Olivier Guillon and Wolfgang Rheinheimer

Scripta Materialia, 2025, 256, 116414
DOI: 10.1016/j.scriptamat.2024.116414

Photonic Sintering of Oxide Ceramic Films: Effect of Colored FexOy Nanoparticle Pigments

Evgeniia Gilshtein, Stefan Pfeiffer, Severin Siegrist, Vitor Vlnieska, Thomas Graule and Yaroslav E. Romanyuk

Ceramics, 2022, 5, 351
DOI: 10.3390/ceramics5030027

Effect of particle size distribution on cold sintering of amorphous silica

Keitaro Yamaguchi, Masato Nakanishi and Shinobu Hashimoto

Journal of the European Ceramic Society, 2025, 45, 117380
DOI: 10.1016/j.jeurceramsoc.2025.117380

Challenges during Flash Lamp Annealing of Aerosol‐Deposited Barium Titanate Films

Michel Kuhfuß, Juliette Cardoletti, Udo R. Eckstein, Shaoxiong Xie, Alexander Martin, Ken‐ichi Kakimoto, Sebastjan Glinšek and Kyle G. Webber

Adv Eng Mater, 2026, 28
DOI: 10.1002/adem.202502049

Blacklight sintering of BaTiO3 ceramics

Michael Scherer, Marie-Gabrielle Ameres, Wolfgang Rheinheimer, Till Frömling, Jürgen Rödel and Lovro Fulanović

Journal of the European Ceramic Society, 2023, 43, 5406
DOI: 10.1016/j.jeurceramsoc.2023.04.034

Advancing proton-conducting ceramic electrochemical devices: perspectives on benchmarking and barriers to progress

Charlie Meisel, You-Dong Kim, David Diercks, Ryan O’Hayre and Neal P. Sullivan

Front. Energy Res., 2025, 13
DOI: 10.3389/fenrg.2025.1565315

Flash and Breakdown: Thermal Runaway and Dielectric Breakdown as Competing Mechanisms During Flash Sintering of Barium Titanate

Daniil Lewin, Ivo Michiels, Sobhan Mohammadi Fathabad, Eva Kröll, Karl-Heinz Menze and Doru C. Lupascu

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202300142

Boron carbide with improved mechanical properties fabricated via rapid pressureless densification with electromagnetic induction assistance

Anna V. Gubarevich, Gen Homma and Katsumi Yoshida

Scripta Materialia, 2024, 238, 115731
DOI: 10.1016/j.scriptamat.2023.115731

Review of advances and challenges in Li7La3Zr2O12 solid electrolytes: From processing to performance

Adrian Sazvar, Soroush Ghahramani, Omid Banapour Ghaffari, Seyed Ali Zargar and Mohammad Golmohammad

Journal of Power Sources, 2025, 657, 238150
DOI: 10.1016/j.jpowsour.2025.238150

Sintering at extreme rates: A comparative study between blacklight and ultrafast high‐temperature sintering

Michael Scherer, Zonghao Guo, Lovro Fulanović, Richard I. Todd and Jürgen Rödel

J Am Ceram Soc., 2025, 108
DOI: 10.1111/jace.70085

Induction ultrafast sintering

Sashank Shivakumar, Keyu Cao, Wei Huang and Jian Luo

Scripta Materialia, 2026, 272, 117066
DOI: 10.1016/j.scriptamat.2025.117066

A Tracer Diffusion Study of Diverse Photo‐Ionic Phenomena in Strontium Titanate

David M. Schwenkel, Timon F. Kielgas, George F. Harrington and Roger A. De Souza

Adv Funct Materials, 2025
DOI: 10.1002/adfm.202519571

From pit fire to Ultrafast High-temperature Sintering (UHS): A review on ultrarapid consolidation

Milad Kermani, Chunfeng Hu and Salvatore Grasso

Ceramics International, 2023, 49, 4017
DOI: 10.1016/j.ceramint.2022.11.091