Issue 7, 2020

Influence of intimacy for metal-mesoporous solid acids catalysts for n-alkanes hydro-conversion

Abstract

Pt on both ordered mesoporous Al-SBA-15 and commercial amorphous mesoporous silica–alumina bi-functional catalysts were prepared and studied for n-heptane hydro-isomerization and n-hexadecane hydro-cracking. We investigated the influence of the location of the Pt nanoparticles and their proximity to the acid sites; by depositing Pt in a controlled manner either in the mesopores of the solid acid or on a γ-Al2O3 binder, surrounding the solid acid particles. We demonstrate that in the case of both ordered and amorphous mesoporous acidic support, a distance between the metal and acid sites of a hundreds of nanometers gives similar results compared to the closest intimacy (below 10 nm) between these functions. Due to the medium strength Brønsted acid sites of the Al-SBA-15, Pt–Al-SBA-15 exhibits higher activity than the corresponding Pt on commercial amorphous silica–alumina. These results suggest that, in the case of mesoporous solid acids, a fine control at the nanoscale of the proximity between the active sites is less important than the number and nature of the acid sites.

Graphical abstract: Influence of intimacy for metal-mesoporous solid acids catalysts for n-alkanes hydro-conversion

Supplementary files

Article information

Article type
Paper
Submitted
11 Гру 2019
Accepted
04 Бер 2020
First published
06 Бер 2020
This article is Open Access
Creative Commons BY-NC license

Catal. Sci. Technol., 2020,10, 2111-2119

Influence of intimacy for metal-mesoporous solid acids catalysts for n-alkanes hydro-conversion

J. Harmel, L. I. van der Wal, J. Zečević, P. E. de Jongh and K. P. de Jong, Catal. Sci. Technol., 2020, 10, 2111 DOI: 10.1039/C9CY02510C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements