Issue 39, 2023

A thermally etched N-doped porous layered silicon anode for improved cycling stability of lithium-ion batteries

Abstract

The development of advanced porous silicon-based materials for lithium-ion battery anodes, which can accommodate the expansion of electrodes during cycling, is necessary to enhance cyclability. In this study, a metal oxide-based thermal etching method, to fabricate N-doped porous layered silicon nanoflakes (P-Si NFs), is proposed. It is carried out by in situ growth of metal oxide (Fe) precursors on siloxene (Si NFs), followed by thermal etching and acid treatment. It is noteworthy that P-Si NFs retain the 2D lamellar structure of Si NFs, and the N-doped porous surface structure can effectively alleviate volume expansion during cycling and improve the efficiency of lithium-ion transport and diffusion. As a result, 89.6% (∼581 mA h g−1) of the maximum capacity (648 mA h g−1) was maintained after 500 cycles at 2 A g−1. The coulombic efficiency remained close to 100%, indicating good cycling stability of the P-Si NF anode. This work provides important insights into the design of silicon-based anodes for high-performance lithium-ion batteries.

Graphical abstract: A thermally etched N-doped porous layered silicon anode for improved cycling stability of lithium-ion batteries

  • This article is part of the themed collection: #MyFirstJMCC

Supplementary files

Article information

Article type
Paper
Submitted
25 Чер 2023
Accepted
04 Вер 2023
First published
04 Вер 2023

J. Mater. Chem. C, 2023,11, 13466-13475

A thermally etched N-doped porous layered silicon anode for improved cycling stability of lithium-ion batteries

B. Bai, L. Qiu, Y. Liu, Z. Su, L. Song and P. Du, J. Mater. Chem. C, 2023, 11, 13466 DOI: 10.1039/D3TC02218H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements