Issue 4, 2017

Thienobenzene-fused perylene bisimide as a non-fullerene acceptor for organic solar cells with a high open-circuit voltage and power conversion efficiency

Abstract

Perylene bisimide (PBI) based molecules have recently attracted tremendous interest as acceptors in non-fullerene organic solar cells. However, most PBI-based acceptors possess deep LUMO energy levels (−3.9 ∼ −4.0 eV) and show an open-circuit voltage (Voc) below 0.90 V, thus limiting the improvement of device efficiency. Here, we report two novel ring-fused PBI dimers, SdiPBI-BT and diPBI-BT, with thienobenzene fused to the bay region of the PBI subunits. Conventional bulk-heterojunction (BHJ) solar cells based on SdiPBI-BT show a power conversion efficiency (PCE) of 6.71% with a high Voc value of 0.95 V, a short-circuit current density (Jsc) of 10.31 mA cm−2 and a high fill factor (FF) of 68.7%. Devices based on diPBI-BT show a PCE of 5.84% with a high Voc value of 0.99 V. These results demonstrate that ring-fused PBI derivatives are promising materials for non-fullerene cells.

Graphical abstract: Thienobenzene-fused perylene bisimide as a non-fullerene acceptor for organic solar cells with a high open-circuit voltage and power conversion efficiency

Supplementary files

Article information

Article type
Research Article
Submitted
31 Сер 2016
Accepted
15 Жов 2016
First published
01 Лис 2016

Mater. Chem. Front., 2017,1, 749-756

Thienobenzene-fused perylene bisimide as a non-fullerene acceptor for organic solar cells with a high open-circuit voltage and power conversion efficiency

C. Zhang, T. Liu, W. Zeng, D. Xie, Z. Luo, Y. Sun and C. Yang, Mater. Chem. Front., 2017, 1, 749 DOI: 10.1039/C6QM00194G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements