Issue 35, 2024

Twin boundaries induced by high-temperature shock boost the structural stability of Li-rich layered-oxide

Abstract

Li-rich cathode materials are one of the most potential candidates for next-generation Li-ion batteries. However, they suffer from severe capacity degradation because of cracks and continuous structural transformation during cycling. Defect engineering can effectively tune the electronic and crystal structures of nanomaterials and improve the electrochemical performance of cathode materials. To date, it is challenging to introduce dense defects into the materials synthesized via conventional tube furnace calcination due to the thermodynamic and kinetic equilibrium. In this work, a non-equilibrium high-temperature shock (HTS) strategy with ultra-fast cooling, accompanied with the processes of rapid heating and cooling, is reported to introduce twin boundaries (TBs) into Li1.2Ni0.13Co0.13Mn0.54O2. The rock-salt phase along the TBs acts as a rigid framework that mitigates the inherent phase transformation of Li-rich layered-oxide materials during cycling. Benefiting from the unique structure, Li1.2Ni0.13Co0.13Mn0.54O2 prepared via the HTS method exhibits a superior reversible capacity of 278 mA h g−1 at 0.1C, a high initial coulombic efficiency of 81%, and a capacity retention of 89.4% after 100 cycles at 0.5C. This work exerts profound implications on understanding defect engineering for modulating the structure and electrochemical performance of materials.

Graphical abstract: Twin boundaries induced by high-temperature shock boost the structural stability of Li-rich layered-oxide

Supplementary files

Article information

Article type
Paper
Submitted
04 Тра 2024
Accepted
26 Лип 2024
First published
29 Лип 2024

J. Mater. Chem. A, 2024,12, 23712-23722

Twin boundaries induced by high-temperature shock boost the structural stability of Li-rich layered-oxide

Z. Liu, C. Zeng, J. Zhang, J. Luo, Z. Guo, Z. Li, R. Liu, W. Liu, J. Ding, Y. Chen and W. Hu, J. Mater. Chem. A, 2024, 12, 23712 DOI: 10.1039/D4TA03098B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements