Issue 13, 2024

Novel heat storage ionomer binder for thermal management of Li-ion batteries

Abstract

Lithium-ion batteries (LIBs) are promising for power batteries because of their high energy density and working voltage, but the high accident rate caused by the flammable electrolyte and constantly accumulating heat scares consumers and restricts their market. Herein, a novel heat storage ionomer binder (HSIB) with highly efficient heat-storage ability is proposed to function as an internal temperature conditioner, which can effectively store heat and accommodate temperature rise, allowing the battery to function steadily over a wider temperature range while not significantly increasing the weight or volume of the battery. A nail test and thermal simulation demonstrate that HSIB can decrease the temperature rise of the cell by about 30% and reduce the risk of thermal runaway due to the heat storage ability of the polyethylene glycol (PEG) main body. The assembled LiFePO4 (LFP) cell with HSIB shows lower polarization (ΔV decreased by 25 mV over PVDF) in a CV test owing to fast Li+ diffusion pathways constructed by the binder, and extra capacity and higher capacity retention of 14.38% are achieved. Moreover, an LFP cell with HSIB shows good thermal endurance in a designed temperature variation test, suggesting that HSIB offers a novel practical solution for battery safety.

Graphical abstract: Novel heat storage ionomer binder for thermal management of Li-ion batteries

Supplementary files

Article information

Article type
Communication
Submitted
04 Гру 2023
Accepted
26 Лют 2024
First published
27 Лют 2024

J. Mater. Chem. A, 2024,12, 7508-7514

Novel heat storage ionomer binder for thermal management of Li-ion batteries

D. Shen, T. Han, J. Liu, J. Yang, J. Zhou, Y. Li, X. Zhou, Z. Wang, T. Qian and C. Yan, J. Mater. Chem. A, 2024, 12, 7508 DOI: 10.1039/D3TA07490K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements