Issue 36, 2020

Surface functionalization – a new functional dimension added to 3D printing

Abstract

Various requirements for 3D printing raised by actual applications in different fields have provoked the rapid development of technologies together with various specific materials. A protocol combining 3D printing with surface modification has stood out recently due to its outstanding capabilities to meet requirements in fields where surface properties are critical, allowing the surface performances of 3D-printed architectures to be controlled. So-called surface-functionalized 3D printing, via adding a new functional dimension to the surface of 3D-printed objects, is believed to be a robust, time-saving, cost-effective, and highly desirable approach for 3D printing, meeting a variety of demands, compared to developing special-purpose materials for each solo case. The general strategy and methods, including etching, deposition processing, micro-/nano-composition coating, and polymer brush assisted surface modification, are summarized in this review, as are the various applications and feasibilities for use in biomedicine, engineering, flexible electronics, smart devices, and so forth, due to the acquired features originating from postprocessing, including wettability, biocompatibility and bioactivity, high strength and conductivity, etc.

Graphical abstract: Surface functionalization – a new functional dimension added to 3D printing

Article information

Article type
Review Article
Submitted
16 Чер 2020
Accepted
14 Сер 2020
First published
17 Сер 2020

J. Mater. Chem. C, 2020,8, 12380-12411

Surface functionalization – a new functional dimension added to 3D printing

P. Jiang, Z. Ji, X. Wang and F. Zhou, J. Mater. Chem. C, 2020, 8, 12380 DOI: 10.1039/D0TC02850A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements