Issue 47, 2019

Electrical characterization of leaf-based wires & supercapacitors

Abstract

Electronic waste (e-waste) is a growing problem in the world due to increasing consumption and subsequent discarding of electronic devices. One of the ways to address this problem is to develop electronics made up of biodegradable components. Leaves are readily available, biodegradable and can be found with various types of architecture of the vascular conduits within. We investigated the possibility of developing electronic components based on leaves of a monocotyledon plant by introducing a conducting polymer inside the vascular conduits. We were able to construct conducting wires in those conduits extending to centimeters in length within a leaf. Furthermore, we were able to demonstrate the construction of a supercapacitor within a leaf by using the conducting conduits as electrodes. These results suggest the possibility of constructing embedded electronic components within leaves which may provide an alternative towards the development of biodegradable electronics.

Graphical abstract: Electrical characterization of leaf-based wires & supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
10 Лип 2019
Accepted
27 Сер 2019
First published
30 Сер 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 27289-27293

Electrical characterization of leaf-based wires & supercapacitors

R. Y. Adhikari, J. Terrell, J. Targos, K. A. Huffman, H. Wang and J. Cradlebaugh, RSC Adv., 2019, 9, 27289 DOI: 10.1039/C9RA05287A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements