Volume 192, 2016

Post-combustion carbon dioxide capture cost reduction to 2030 and beyond

Abstract

Post-combustion CO2 capture (PCC) can be achieved using a variety of technologies. Importantly it is applicable to a wide range of processes and may also be retrofitted in certain cases. This paper covers the use of PCC for low carbon power generation from new natural gas combined cycle (NGCC) plants that are expected to be built in the UK in the 2020s and 2030s and that will run into the 2050s. Costs appear potentially comparable with other low carbon and controllable generation sources such as nuclear or renewables plus storage, especially with the lower gas prices that can be expected in a carbon-constrained world. Non-fuel cost reduction is still, however, desirable and, since CO2 capture is a new application, significant potential is likely to exist. For the NGCC+PCC examples shown in this paper, moving from ‘first of a kind’ (FOAK) to ‘nth of a kind’ (NOAK) gives significant improvements through both reduced financing costs and capital cost reductions. To achieve this the main emphasis needs to be on ‘commercial readiness’, rather than on system-level ‘technical readiness’, and on improvements through innovation activities, supported by underpinning research, that develop novel sub-processes; this will also maintain NOAK status for cost-effective financing. Feasible reductions in the energy penalty for PCC capture have much less impact, reflecting the inherently high levels of efficiency for modern NGCC+PCC plants.

Associated articles

Article information

Article type
Paper
Submitted
10 Бер 2016
Accepted
01 Кві 2016
First published
01 Кві 2016

Faraday Discuss., 2016,192, 27-35

Post-combustion carbon dioxide capture cost reduction to 2030 and beyond

B. Adderley, J. Carey, J. Gibbins, M. Lucquiaud and R. Smith, Faraday Discuss., 2016, 192, 27 DOI: 10.1039/C6FD00046K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements