Issue 24, 2015

Ionic electroactive polymer actuators as active microfluidic mixers

Abstract

On-chip sample processing is integral to the continued development of lab-on-a-chip devices for various applications. An active microfluidic mixer prototype is proposed using ionic electroactive polymer actuators (IEAPAs) as artificial cilia. A proof-of-concept experiment was performed in which the actuators were shown to produce localized flow pattern disruptions in the laminar flow regime. Suggestions for further engineering and optimization of a scaled-down, complete device are provided. While the device in its current state of development necessitates further engineering, the use of IEAPAs addresses issues currently associated with the use of electromechanical actuators as active microfluidic mixers and may prove to be a useful alternative to other similar materials.

Graphical abstract: Ionic electroactive polymer actuators as active microfluidic mixers

Supplementary files

Article information

Article type
Paper
Submitted
24 Кві 2015
Accepted
04 Лис 2015
First published
06 Лис 2015

Anal. Methods, 2015,7, 10217-10223

Ionic electroactive polymer actuators as active microfluidic mixers

C. Meis, R. Montazami and N. Hashemi, Anal. Methods, 2015, 7, 10217 DOI: 10.1039/C5AY01061F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements