Issue 37, 2014

Flexible quantum dot-sensitized solar cells with improved efficiencies based on woven titanium wires

Abstract

Uniform zinc oxide (ZnO) nanosheet arrays were grown on woven titanium wires using a low temperature hydrothermal method. Photoanodes were prepared by depositing CdS and CdSe quantum dots onto the ZnO nanosheet arrays by a successive ionic layer adsorption and reaction (SILAR) method. Solar cells were assembled using these nanostructured photoanodes and their photovoltaic performance was characterized. The effect of using SILAR cycles for the deposition of quantum dots on the performance of these nanostructured solar cells was investigated systematically. The overall light-to-electricity conversion efficiency of 0.98% was achieved under 100 mW cm−2 illumination for flexible CdS/CdSe co-sensitized solar cells using conventional Pt foils as counter electrodes. To further improve the performance of the flexible solar cells, PbS and Cu2S counter electrodes based on Pb and Cu foils were fabricated. The best conversion efficiencies of flexible CdS/CdSe co-sensitized solar cells using Cu2S and PbS counter electrodes were 3.4% and 2.5%, which demonstrated a significant enhancement in values for short circuit current, open circuit voltage, and fill factor compared to those obtained with the commonly used Pt and Au electrodes.

Graphical abstract: Flexible quantum dot-sensitized solar cells with improved efficiencies based on woven titanium wires

Supplementary files

Article information

Article type
Paper
Submitted
24 Чер 2014
Accepted
28 Лип 2014
First published
29 Лип 2014

J. Mater. Chem. A, 2014,2, 15546-15552

Flexible quantum dot-sensitized solar cells with improved efficiencies based on woven titanium wires

Y. Li, L. Wei, C. Wu, C. Liu, Y. Chen, H. Liu, J. Jiao and L. Mei, J. Mater. Chem. A, 2014, 2, 15546 DOI: 10.1039/C4TA03212H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements